Add Adapters

To add adapters before you have configured the security feature, just plug them in and connect the adapters to your equipment.

¾¾ To add adapters to a Powerline network with security set:

1.Plug in and connect the new adapters.

2.On all of the previously installed adapters, press and hold the Factory Reset button for one second.

This returns them to the factory settings.

3.Secure the Powerline network:

a.On any of the adapters, press and hold the Security button for two seconds.

b.On any one of the other adapters, press and hold the Security button for two seconds.

Both buttons must be pressed within two minutes.