NETGEAR WPN111NA user manual V1.0, December

NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual

Manually Selecting a Wireless Network in a Configuration without WPS

To manually join a network in which none of the wireless access points or routers support WPS:

1.Use the icon to open the Smart Wizard. On the status bar, click Join a Network.

Figure 2-14

Note: Instead of clicking Join a Network on the status bar, you can also click the Networks tab on the Smart Wizard Settings screen. Then, select a network.

2.Select a network from the drop-down list. If you select a hidden network then you must enter the SSID. Click Next.

Figure 2-15

3.Follow the steps of the wizard to specify the wireless security if used, and to create a profile.

4.Review you settings, and click Finish.

5.You can use the Status Bar to verify your network connection. For more information, see “Smart Wizard Status Bar” on page 1-10. Click Close to exit the Smart Wizard.

2-11

v1.0, December 2007