NETGEAR WPN111NA user manual Setting up WPA2-PSK Security

NETGEAR RangeMax Next Wireless USB 2.0 Adapter WN111 User Manual

2.Configure the Security settings.

a.In the Profile box, select the profile or type in a profile name.

b.In the Network Name (SSID) field select the network, or enter the SSID.

Note: You will not get a wireless network connection unless the network SSID matches exactly what is configured in the access point.

c.In the Security section, select WPA-PSK [TKIP] and enter the passphrase. For more information about WPA-PSK, see the link to “Wireless Communications:” in Appendix B.

3.Save your settings in a Profile.

a.Click the Save Profile button. All the configuration settings are saved in this profile.

b.Click Apply and then click Close to exit the Smart Wizard.

Setting up WPA2-PSK Security

Follow these steps to configure WPA2-PSK Security:

1.Run the WN111 Smart Wizard.

a.Make sure the WN111 software is installed and the WN111 is fully inserted in a USB port in your computer.

b.Use the icon to open the Smart Wizard. The Settings screen displays:

Figure 2-23

2-21

v1.0, December 2007