NETGEAR WMCE2001-100NAS, WNCE2001 user manual IP Address, Managing Your Configuration Settings

Page 13

Universal WiFi Internet Adapter WNCE2001

IP Address

From the Internet adapter menu at http://www.mywifiext.net, under the Maintenance heading, select IP Address. The following screen displays:

This screen shows whether the Internet adapter is set to get its IP address dynamically from the router (this is the most common setting), or is set as a static IP address.

Get Dynamically From Router: The wireless network router assigns an IP address when the Internet adapter connects to its wireless network. Most networks are set up so that the router automatically does this.

Use Static IP Address: Specify a static IP address. This is not usually necessary. If you set this up, you should be technically experienced or have a technically experienced person help you.

-IP Address: The static IP address.

-IP Subnet Mask: The subnet mask associated with the IP address.

-Gateway IP Address:

-Primary DNS: The primary domain name server (DNS).

-Secondary DNS: The secondary domain name server (DNS).

Managing Your Configuration Settings

From the Internet adapter menu at http://www.mywifiext.net, under the Maintenance heading, select Backup Settings. The following screen displays

Chapter 2. Advanced Settings 13

Image 13
Contents Universal WiFi Internet Adapter WNCE2001 Trademarks Technical SupportStatement of Conditions Table of Contents Top Panel with LEDs Hardware FeaturesRear Panel Plug converter Power Connection OptionsPreparing to Change Your Internet Adapter Settings InstallationConnecting the Internet adapter to a laptop Configuration, see , Advanced Settings Using the Smart Wizard to Change the SetupDevice Status Screen Advanced SettingsField Description Field Description Show StatisticsConnection Status Fields Dhcp Connection StatusIP Address Managing Your Configuration SettingsRestoring Settings Backing Up SettingsErasing the Settings Upgrading the Firmware To check for firmware and upgrade if it is availableUsing Push N Connect WPS Advanced Wireless SettingsPush and Connect recommended . Either click To join a network using WPS after installationConnecting to Wireless Networks Using the USB Power CableUniversal WiFi Internet Adapter WNCE2001 Factory Settings Factory Settings and Technical SpecificationsFeature Description Technical SpecificationsRelated Documents FCC Requirements for Operation in the United States Regulatory Compliance InformationFCC RF Radiation Exposure FCC Radio Frequency Interference Warnings & InstructionsSpanish Europe EU Declaration of ConformityPertinentes de la directive 1999/5/CE Interference Reduction Table
Related manuals
Manual 2 pages 53.62 Kb