A. Factory Settings and Technical | A | |
| ||
| Specifications |
|
|
|
|
Factory Settings
You can use the Reset button on the rear panel to return your adapter to its factory settings.
Reset button
Figure 6. The Reset button restores factory settings
Use a pin or paperclip to press the Reset button and hold it for 5 seconds until the power LED blinks amber.
Table 4.
Factory Settings
Smart Wizard | Enabled | |
|
|
|
Wireless | Wireless communication | Disabled |
|
|
|
| Wireless Network Name (SSID) | Any (will connect to the first wireless network that responds) |
|
|
|
| Security | Disabled |
|
|
|
| Transmission speed | Auto1 |
| Country/Region | United States (varies by region) |
|
|
|
| Operating mode | 802.11n, 802.11g, 802.11b |
|
|
|
| Data rate | Up to 300 Mbps |
|
|
|
1 Maximum wireless signal rate (IEEE Standard 802.11). Actual throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate
Appendix A. Factory Settings and Technical Specifications 20