NETGEAR WNCE2001, WMCE2001-100NAS user manual Field Description

Page 10

Universal WiFi Internet Adapter WNCE2001

Table 1. Device Status Settings

Field

 

Description

 

 

 

Device Status

Hardware Version

The hardware version of the Internet adapter.

 

 

 

 

Firmware Version

The current firmware version of the Internet adapter.

 

 

If you upgrade the firmware, this field changes.

 

 

 

 

GUI Language Version

The language version running on the Internet

 

 

adapter. If you upgrade the firmware, this field

 

 

changes.

 

 

 

Wireless Connection

Wireless Connection

The status of your wireless connection (connected or

Status

 

disconnected).

 

 

 

 

Link Rate

The actual transmission (Tx) and receive (Rx) link

 

 

rate in the current wireless connection

 

 

 

 

Name (SSID)

Your Internet adapter is set up to connect to this

 

 

SSID, also called the wireless name.

 

 

 

 

Region

The location of the Internet adapter.

 

 

 

 

Channel

The wireless channel of the network.

 

 

 

 

Security Type

The security setting for the wireless network.

 

 

 

LAN Port

MAC Address

The physical address of the Internet adapter, as

 

 

seen from the local area network (LAN).

 

 

 

 

IP Address

The IP address of the Internet adapter. The default is

 

 

192.168.1.251.

 

 

 

 

DHCP Server

Identifies the network DHCP server on the wireless

 

 

network.

 

 

 

 

IP Subnet Mask

The IP subnet mask associated with the LAN IP

 

 

address of the Internet adapter. The default is

 

 

255.255.255.0.

 

 

 

 

Gateway IP Address

The IP address of the wireless network gateway.

 

 

 

 

DNS Server

The IP address of the Domain Name Server (DNS)

 

 

of the wireless network.

 

 

 

10 Chapter 2. Advanced Settings

Image 10
Contents Universal WiFi Internet Adapter WNCE2001 Trademarks Technical SupportStatement of Conditions Table of Contents Top Panel with LEDs Hardware FeaturesRear Panel Power Connection Options Plug converterInstallation Preparing to Change Your Internet Adapter SettingsConnecting the Internet adapter to a laptop Using the Smart Wizard to Change the Setup Configuration, see , Advanced SettingsAdvanced Settings Device Status ScreenField Description Show Statistics Field DescriptionDhcp Connection Status Connection Status FieldsManaging Your Configuration Settings IP AddressRestoring Settings Backing Up SettingsErasing the Settings To check for firmware and upgrade if it is available Upgrading the FirmwareAdvanced Wireless Settings Using Push N Connect WPSTo join a network using WPS after installation Push and Connect recommended . Either clickUsing the USB Power Cable Connecting to Wireless NetworksUniversal WiFi Internet Adapter WNCE2001 Factory Settings and Technical Specifications Factory SettingsTechnical Specifications Feature DescriptionRelated Documents FCC RF Radiation Exposure Regulatory Compliance InformationFCC Requirements for Operation in the United States FCC Radio Frequency Interference Warnings & InstructionsEurope EU Declaration of Conformity SpanishPertinentes de la directive 1999/5/CE Interference Reduction Table
Related manuals
Manual 2 pages 53.62 Kb