NETGEAR WG111 Connecting to Another PC in Ad-hoc Mode, How to Configure an Ad-hoc Mode Profile

Page 41

User Manual for the NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111

a.Type a descriptive name for the Profile in the “Profiles” field.

b.Click Save Profile. All the configuration settings are saved in this profile.

c.Click Apply.

d.Click Close to exit the configuration utility or Cancel to return to the previous settings

4.Verify wireless connectivity to your network.

Verify connectivity by using a browser such as Netscape or Internet Explorer to connect to the Internet, or check for file and printer access on your network.

You can check the status bar in the configuration utility for the current connection status.

Note: If you cannot connect, see the “Troubleshooting” on page 3-14. Also, for problems with accessing network resources, the Windows Client and File and Print Sharing software might not be installed and configured properly on your computers. Please refer to “Preparing Your Computers for TCP/IP Networking” on page C-1.

Connecting to Another PC in Ad-hoc Mode

The peer-to-peer setting of the WG111 uses Ad-Hoc mode. Ad-Hoc mode is an 802.11 networking framework in which devices or computers communicate directly with each other, without the use of an access point. For example, this mode is used when two Windows computers are configured with file and print sharing enabled and you want to exchange files directly between them.

How to Configure an Ad-hoc Mode Profile

Note: Ad-hoc mode will not work using DHCP settings. Ad-hoc mode requires either static IP addresses (such as 192.168.0.1). For instructions on setting up static IP addresses on a Windows PC, refer to the PC Networking Tutorial included on the NETGEAR 54 Mbps Wireless USB 2.0 Adapter WG111 Resource CD (230-10044-01).

Follow the instructions below to configure an Ad-hoc mode profile.

1.Run the WG111 Configuration Utility.

a.Make sure the WG111 software is installed and the WG111 is connected to your PC.

b.Open the configuration utility by clicking on the WG111 icon in the Windows system tray.

c.Click the Settings tab.

Configuration

4-3

202-10026-01

Image 41

Contents 202-10026-01 Vcci Statement Certificate of the Manufacturer/ImporterFCC Requirements for Operation in the United States FCC Guidelines for Human ExposureDeclaration Of Conformity Netgear 54 Mbps Wireless USB 2.0 Adapter WG111 Operation Using 2.4 GHz Channels in FranceMetropolitan Regions with Eased Restrictions in 2.4GHz Band 202-10026-01 Contents Appendix C Preparing Your PCs for Network Access Glossary Index Contents Chapter About This Manual Manual SpecificationsAudience, Scope, Conventions Typographical conventionsHtml version of this manual How to Use this ManualHow to Print this Manual About This Manual About the WG111 Key FeaturesChapter Introduction What’s in the Box? Road Map for ‘How to Get There From Here’If I Want To? What Do I Do? What’s Needed? How Do I? Road Map for How to Get There From HereNetgear 54 Mbps Exchange files Use printers Verifying System Requirements Chapter Basic SetupWhat You Need Before You Begin Observing Location and Range Guidelines Two Basic Operating ModesWG111 Default Wireless Configuration Settings Basic Installation Instructions Install the WG111 driver and configuration utility software For Windows XP Users Installing a WG111Install the Netgear 54 Mbps Wireless USB 2.0 Adapter WG111 Configure your WG111 Verify wireless connectivity to your network Click Install Driver and Utility For Windows 2000 & 98/Me Users Installing a WG111Found New Hardware Wizard WG111 System Tray Icon Profile Configure your WG111 and saveVerify wireless connectivity to your network LED Descriptions WG111 Wireless Connection IndicatorsInterpreting the LED on the WG111 Interpreting System Tray Icon Colors TroubleshootingRed YellowBasic Tips Troubleshooting Frequently Asked QuestionsBasic Setup Basic Setup Basic Setup Using Configuration Profiles Chapter ConfigurationUnderstanding the Configuration Options How to Configure an Infrastructure Mode Profile Connecting to an Access Point in Infrastructure ModeRun the WG111 Configuration Utility Configure the wireless Network settingsHow to Configure an Ad-hoc Mode Profile Connecting to Another PC in Ad-hoc ModeWindows Run program dialog box Configure the PC network settingsPing test results How to Start a Computer-to-Computer Ad-Hoc Network Enabling Wireless Security FeaturesConfigure the Security settings How to Configure WEP Encryption SecuritySave your settings in a Profile Statistics Advanced SettingsConfiguration USB Appendix a Technical SpecificationsTechnical Specifications Infrastructure Mode Appendix B Wireless Networking BasicsWireless Networking Overview Network Name Extended Service Set Identification Essid Authentication and WEPAd Hoc Mode Peer-to-Peer Workgroup Open System Authentication AuthenticationAuthentication Open System Steps Do Not Use WEP Authentication Shared Key StepsKey Size WEP Configuration OptionsWireless Channels 802.11b and g Radio Frequency Channels Radio frequency channels used are listed in TableConfiguring Windows 98 and Me for TCP/IP Networking Appendix C Preparing Your PCs for Network AccessInstall or Verify Windows Networking Components Preparing Your Computers for TCP/IP NetworkingPreparing Your PCs for Network Access Locate your Network Neighborhood icon Choose Settings, and then Control PanelEnabling Dhcp in Windows 98 and Me Primary Network Logon is set to Windows logon Verifying TCP/IP Properties Selecting Windows’ Internet Access MethodConfiguring Windows 2000 or XP for TCP/IP Networking Dhcp Configuration of TCP/IP in Windows XP Dhcp Configuration of TCP/IP in Windows XP orTCP/IP details are presented on Support tab Right click on Local Area Connection and select Properties Dhcp Configuration of TCP/IP in WindowsVerify that Obtain an IP address Obtain an IP address automatically is selected Verifying TCP/IP Properties for Windows XP or Preparing Your PCs for Network Access Glossary DSL Internet service provider Ssid Wins Glossary Numerics Index