Appendix A Default Settings and Technical Specifications
This appendix provides the factory default settings and technical specifications for the ProSafe SSL VPN Concentrator 25 SSL312.
Factory Default Settings
You can use the push button located on the front of your device to reset all settings to their factory defaults. This is called a hard reset.
•To perform a hard reset, push and hold the Factory Defaults button for approximately 5 seconds, until the TEST light turns on. Your device will return to the factory configuration settings shown in Table
Table A-1. SSL312 Default Configuration Settings
Feature | Description | |
|
|
|
Management Login |
| |
|
|
|
| User Login URL | 192.168.1.1 |
|
|
|
| User Name (case sensitive) | admin |
|
|
|
| Login Password (case sensitive) | password |
|
|
|
Ethernet Port 1 |
| |
|
|
|
| IP Address | 192.168.1.1 |
|
|
|
| Subnet Mask | 255.255.255.0 |
|
|
|
| Port Speed | 10/100 |
|
|
|
| Gateway Address | 0.0.0.0 |
|
|
|
Ethernet Port 2 |
| |
|
|
|
| IP Address | 10.0.0.1 |
|
|
|
| Subnet Mask | 255.0.0.0 |
|
|
|
| Port Speed | 10/100 |
|
|
|
| Gateway Address | 0.0.0.0 |
|
|
|
Default Settings and Technical Specifications |