NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
•Default gateway address (Firewall/Router address): 192.168.1.254
In the configuration shown in the diagram, the IP addresses of devices in the local network are configured in the 192.168.1.0/24 subnet and the default gateway for these devices is the internal IP address of the local firewall or router, 192.168.1.254.
Firewall/Router IP Address 192.168.1.254
Corporate Server
IP Address 192.168.1.3
LAN Subnet 192.168.1.0/24
SSL312 IP Address 192.168.1.1
Figure
All connections initiated from the Internet can be blocked by the firewall except HTTPS traffic (TCP port 443). HTTPS traffic should be forwarded to the SSL VPN Concentrator appliance address, 192.168.1.1.
Network Interface and Default Gateway Configuration
Configure the SSL VPN Concentrator network Interface settings by selecting Network under the System Configuration menu in the left navigation pane and then clicking the Interface radio button.
To configure the Ethernet Port 1 and Ethernet Port 2 Interfaces:
1.Enter the Ethernet Port 1 (SSL) IP address of your SSL VPN Concentrator. This address should be a unique address in the same subnet as the rest of your local network. The factory default is 192.168.1.1.
Additional System Configuration |