NETGEAR ProSafe SSL VPN Concentrator 25 SSL312 Reference Manual
Defining and Editing User Policies
To define user access policies:
1.On the Edit User Settings screen, click Add Policy. An Add Policy menu displays.
Figure
2.In the Apply Policy To
3.In the Policy Name field, enter a name for the policy.
Note: SSL VPN Concentrator policies apply to the destination address(es) of the SSL VPN connection, not the source address. You cannot permit or block a specific
IP address on the Internet from authenticating to the SSL VPN Concentrator through the policy engine.
•If your policy applies to a predefined network resource, select the name of the resource from the Defined Resource menu. For information about creating network resources, refer to “Using Network Resource Objects to Simplify Policies” on page
•If your policy applies to a specific host, enter the IP address of the local host machine in the IP Address field.
•If your policy applies to a network, enter the network address in the Network Address field and the subnet mask in the Subnet Mask field.
4.From the Service
5.From the Status
Setting Up User and Group Access Policies |