NETGEAR FS526Tv2 Prepare the Site, Install the Switch on a Flat Surface, Site requirements

Page 12

ProSAFE 26-Port Fast Ethernet Smart Switch FS526Tv2

Step 1: Prepare the Site

Before you install the switch, ensure that the operating environment meets the requirements in that are described the following table.

Table 2. Site requirements

Characteristics

Requirements

 

 

Mounting

• Desktop installations. Provide a flat table or shelf surface.

 

• Rack-mount installations. Use a 19-inch (48.3-centimeter) EIA standard equipment

 

rack that is grounded and physically secure. You also need to use the rack-mount kit

 

that is supplied with the switch.

 

 

Access

Place the switch in a position that allows access to the RJ-45 ports on the front panel, that

 

allows you to see the LEDs on the front panel, and that allows you easy and safe access to

 

the power connector.

 

 

Power source

Provide a power source within 6 feet (1.8 meters) of the installation location. Power

 

specifications for the switch are described in Appendix A, Physical and Technical

 

Specifications. Ensure that the AC outlet is not controlled by a wall switch, which can

 

accidentally turn off power to the outlet and the switch.

 

 

Environmental

• Temperature. Install the switch in a dry area, with ambient temperature between 0 and

 

50ºC (32 and 122ºF). Keep the switch away from heat sources such as direct sunlight,

 

warm-air exhausts, hot-air vents, and heaters.

 

• Operating humidity. The installation location should have a maximum relative humidity

 

of 90%, noncondensing.

 

• Ventilation. Do not restrict airflow by covering or obstructing air inlets on the sides of

 

the switch. Keep at least 2 inches (5.08 centimeters) free on all sides for cooling. The

 

room or wiring closet in which the switch is installed needs to have adequate airflow.

 

• Operating conditions. Keep the switch at least 6 feet (1.83 meters) away from the

 

nearest source of electromagnetic noise, such as a photocopy machine.

 

 

Step 2: Install the Switch

You can install the switch on a flat surface or in a standard 19-inch rack.

Install the Switch on a Flat Surface

The switch ships with four self-adhesive rubber footpads. Stick one rubber footpad on each of the four concave spaces on the bottom of the switch. The rubber footpads cushion the switch against shock and vibrations.

Installation

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents ProSAFE 26-Port Fast Ethernet Smart Switch FS526Tv2 ProSAFE 26-Port Fast Ethernet Smart Switch FS526Tv2 Publication Publish Date Comments Part NumberContents Introduction and Hardware Description Overview Introduction and Hardware DescriptionSwitch Features Example of a network configurationPackage Contents Front Panel Back PanelLEDs Product LabelLED descriptions PortFactory Defaults Button and Reset Button RJ-45 PortsInstallation Install the Switch Install the Switch on a Flat SurfaceInstallation Prepare the SiteInstall the Switch in a Rack  To install the switch in a rackCheck the Installation Connect Devices to the SwitchApply AC Power  To apply AC power to the switchTroubleshooting Troubleshooting Chart Troubleshooting SuggestionsTroubleshooting chart TroubleshootingConfiguration Switch IntegrityAutonegotiation Physical and technical specifications Feature DescriptionKCC

FS526Tv2 specifications

The NETGEAR FS526Tv2 is a high-performance Layer 2 managed switch designed to meet the growing networking needs of small to medium-sized businesses. This switch is part of NETGEAR's ProSAFE line, recognized for its reliability and scalability. The FS526Tv2 is equipped with 24 Gigabit Ethernet ports and 2 SFP (small form-factor pluggable) ports, facilitating both copper and fiber connectivity, which means businesses can expand their network infrastructure while maintaining optimal performance.

One of its standout features is the extensive management capabilities, including VLAN support, link aggregation, and network monitoring. The VLAN feature allows users to segment network traffic efficiently, enhancing security and performance by isolating different types of data. With link aggregation, the switch can combine multiple physical connections for improved bandwidth and redundancy, ensuring a resilient network setup.

The FS526Tv2 utilizes advanced Quality of Service (QoS) functionality, which enables prioritization of critical network traffic such as voice over IP (VoIP) or video conferencing. This is particularly vital for businesses relying on real-time applications, ensuring a consistent level of service for all users.

Power over Ethernet (PoE) is another essential characteristic of the FS526Tv2, providing the capability to deliver power and data over the same Ethernet cable. This simplifies the installation of devices like IP cameras and access points, reducing the need for additional power sources and enhancing flexibility in network design.

The switch is designed for energy efficiency, conforming to the IEEE 802.3az standard, which allows for reduced power consumption during low traffic periods. This feature not only lowers operational costs but also contributes to environmental sustainability.

Additional benefits include a user-friendly web-based interface for simplified management, as well as SNMP support for easier integration into larger network management systems. The FS526Tv2's robust hardware and fan-less design ensure quiet operation, making it suitable for office environments.

In conclusion, the NETGEAR FS526Tv2 is a versatile, efficient, and feature-rich managed switch that provides businesses with the tools necessary for building reliable and scalable networks. Its combination of performance, management capabilities, and energy efficiency makes it a smart investment for any organization looking to enhance its networking infrastructure.
Top Page Image Contents