ProSAFE 26-Port Fast Ethernet Smart Switch FS526Tv2
LEDs
The following table describes the LEDs.
Table 1. LED descriptions
Port | LED | Designation |
|
|
|
(Not applicable, system | Power | • Off. Power is disconnected. |
LED) |
| • Solid green. Power is supplied to the switch and the |
|
| switch is operating normally. |
|
|
|
Link/ACT | • Off. No link is established on the port. | |
ports (one LED for each |
| • Solid green. A valid link (at any speed) is established on |
port) |
| the port. |
|
| • Blinking green. Packet transmission or reception occurs |
|
| on the port. |
Two Gigabits Ethernet ports | Link/ACT | • Off. No link is established on the port. |
(one LED for each port) |
| • Solid green. A valid link is established on the port. |
|
| • Blinking green. Packet transmission or reception occurs |
|
| on the port. |
Product Label
The product label on the back panel of the switch shows the hardware model number and version, the software version, the unique MAC address, and the unique serial number. The following figure shows a generic product label.
Figure 5. Generic product label
Introduction and Hardware Description
9