Clarion DXZ845MC owner manual Remaining capacity of the memory, About the 2-ZONE function

English

MUSIC CATCHER Operations

●ALL ERASE

1.Press the [FNC] button to select the M.CATCHER mode.

2.Press the [ERASE] button for 2 seconds or longer to select “ALL ERASE”.

3.While “ALL ERASE” is showing on the dis-

play, press and hold the [ ] button for 2 seconds or longer. The title display shows “ERASING” as ALL ERASE is executed.

Remaining capacity of the memory

By pressing the [REC] button while in the M.CATCHER mode, the remaining capacity of the flash memory can be displayed for 4 sec- onds as an approximate recordable time in “MM (minute): SS (second)”.

The title display shows “AVIL. 123:45”.

Note:

•The recordable time shown varies according to the set recording mode

Different Pieces of Music Heard by Plural Listeners (2-ZONE function)

About the 2-ZONE function

The 2-ZONE function is a function that outputs separate sounds from the MAIN zone and SUB zone by simultaneously operating two sources in the one center unit, thereby allowing plural lis- teners to enjoy separate music sources.

This unit can control its internal sources (radio, CD, MP3, MC, etc.) to play back them, and fur- ther, can simultaneously play back sources from external equipment connected via CeNET (for instance, CD changers etc.).

The sources of the MAIN zone are played back from the speakers of the vehicle side, and those of the SUB zone are from the headphone sys- tems (WH104/WH204).

Notes:

•Except AUX, the MAIN and SUB zones cannot si- multaneously use sources inside this unit.

Also, external equipment connected via CeNET cannot simultaneously be used.

•The TV mode while the 2-ZONE function is tuned on is forced to change to “VTR playback.”

•The ISR function cannot be operated when the 2- ZONE function is turned on.

•The Audio mode and ADF (Anti Distortion Filter) function cannot be set for the sources of the SUB zone.

Setting the 2-ZONE function

The initial setting is “OFF”.

When you have set the 2-ZONE function to “ON” in the initial state, the MAIN zone services for sources inside this unit and the SUB zone, for AUX. Changing a source during later use causes the latest heard source to be invoked.

Press and hold the [ ] button for 1 second or longer to turn on or off. When the 2-ZONE func- tion is turned on, “2-ZONE” on the display lights.

22 DXZ845MC