Operations Common to Each Mode
Setting the method for title scroll |
Set how to scroll in
The factory default setting is “ON”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “AUTO SCROLL”.
3.Turning the [ROTARY] knob clockwise or counterclockwise and select “ON” or “OFF”.
● ON:
To scroll automatically.
●OFF:
To scroll just 1 time when the title was changed or the title key was pressed.
The red
The factory default setting is “OFF”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button and select “BLINK LED”.
3.Turning the [ROTARY] knob clockwise to set this function “ON” or turn it counterclockwise to switch this function “OFF”.
4.Press the [T] button to return to the previous mode.
English
4. Press the [T] button to return to the previous | Setting the Subwoofer | |
mode. | ||
The factory default setting is | ||
|
Dimmer control
You can setting the dimmer control ON or OFF.
The factory default setting is “ON”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “DIMMER”.
3.Turning the [ROTARY] knob clockwise or counterclockwise and select “ON” or “OFF”.
4.Press the [T] button to return to the previous mode.
Adjusting the display contrast
You can adjust the display contrast to match the angle of installation of the unit.
The factory default setting is “8”. (Adjustment level: 1 to 16)
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select “CONTRAST”.
3.Turning the [ROTARY] knob clockwise or counterclockwise to adjust the contrast.
4.Press the [T] button to return to the previous mode.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button and select
3.Turning the [ROTARY] knob clockwise or counterclockwise and select “ON” or “OFF”.
4.Press the [T] button to return to the previous mode.
Setting LOW PASS FILTER
The factory default setting is “THRGH”.
1.Press and hold the [T] button for 1 second or longer to switch to the adjustment selection display.
2.Press the [a] or [d] button to select
3.Turning the [ROTARY] knob clockwise or counterclockwise to select the setting. Each time you turning the [ROTARY] knob, the set- ting changes in the following order:
THRGH ➜ 50Hz ➜ 80Hz ➜ 120Hz
4.Press the [T] button to return to the previous mode.
DXZ845MC 25