
English
9. IN CASE OF DIFFICULTY
| 
 | Problem | Cause | Measure | 
 | 
| 
 | Power does not | Fuse is blown. | Replace with a fuse of the same amperage. If the | |
| 
 | turn on. | 
 | fuse blows again, consult your store of purchase. | |
| 
 | (No sound is | 
 | 
 | 
 | 
| 
 | Incorrect wiring. | Consult your store of purchase. | 
 | |
| 
 | produced.) | 
 | ||
| 
 | 
 | 
 | 
 | 
 | 
| 
 | No sound output | Power antenna lead is | 1. Turn the unit off. | 
 | 
| 
 | when operating | shorted to ground or | 2. Remove all wires attached to the power antenna | |
| 
 | the unit with | excessive current is required | lead. Check each wire for a possible short to | |
| 
 | amplifiers or | for  | ground using an ohm meter. | 
 | 
| 
 | power antenna | or power antenna. | 3. Turn the unit back on. | 
 | 
| 
 | attached. | 
 | 4. Reconnect each amplifier remote wire to the | |
| General | 
 | 
 | power antenna lead one by one. If the amplifiers | |
| 
 | 
 | turn off before all wires are attached, use an | ||
| 
 | 
 | 
 | ||
| 
 | 
 | 
 | external relay to provide  | |
| 
 | 
 | 
 | (excessive current required). | 
 | 
| 
 | 
 | 
 | 
 | 
 | 
| 
 | Nothing happens | The microprocessor has | Turn off the power, then | Reset button | 
| 
 | when buttons are | malfunctioned due to noise, | press the [RELEASE] | 
 | 
| 
 | pressed. | etc. | button and remove the DCP. | 
 | 
| 
 | 
 | 
 | Press the reset button for | 
 | 
| 
 | Display is not | 
 | about 2 seconds with a thin | 
 | 
| 
 | accurate. | 
 | rod. | 
 | 
| 
 | 
 | 
 | 
 | |
| 
 | 
 | DCP or main unit connectors | Wipe the dirt off with a soft cloth moistened with | |
| 
 | 
 | are dirty. | cleaning alcohol. | 
 | 
| 
 | 
 | 
 | 
 | |
| 
 | No sound heard. | There is a disc other than a | With the sloping console open, press and hold the | |
| 
 | 
 | compact disc or foreign | [Q] button for 3 seconds or longer. | 
 | 
| 
 | 
 | matter already in place. | The foreign matter is forcibly ejected. | 
 | 
| 
 | 
 | 
 | 
 | |
| 
 | 
 | MP3/WMA files are absent | Write MP3/WMA files onto the disc properly. | |
| 
 | 
 | in a disc. | 
 | 
 | 
| 
 | 
 | 
 | 
 | 
 | 
| 
 | 
 | Files are not recognized as | Use MP3/WMA files encoded properly. | 
 | 
| CD/MP3/WMA | 
 | an MP3/WMA file. | 
 | 
 | 
| 
 | 
 | 
 | 
 | |
| 
 | File system is not correct. | Use ISO9660 level 1, 2 or JOLIET or Romeo file system. | ||
| 
 | 
 | |||
| 
 | 
 | 
 | 
 | 
 | 
| 
 | Sound skips or is | Disc is dirty. | Clean the disc with a soft cloth. | 
 | 
| 
 | noisy. | 
 | 
 | 
 | 
| 
 | Disc is heavily scratched or | Replace with a disc with no scratches. | 
 | |
| 
 | 
 | 
 | ||
| 
 | 
 | warped. | 
 | 
 | 
| 
 | 
 | 
 | 
 | 
 | 
| 
 | Sound is cut or | MP3/WMA files are not | Use MP3/WMA files encoded properly. | 
 | 
| 
 | skipped. | encoded properly. | 
 | 
 | 
| 
 | Noise is | 
 | 
 | 
 | 
| 
 | generated or | 
 | 
 | 
 | 
| 
 | noise is mixed | 
 | 
 | 
 | 
| 
 | with sound. | 
 | 
 | 
 | 
| 
 | 
 | 
 | 
 | 
 | 
32 DXZ845MC