JVC RX-7000RBK manual English, Adjust the speaker output levels

4.Adjust the speaker output levels.

•To adjust the center speaker level, press CENTER –/+ (from –10 dB to +10 dB).

•To adjust the left rear speaker level, press REAR•L –/+ (from –10 dB to +10 dB).

•To adjust the right rear speaker level, press REAR•R –/+ (from –10 dB to +10 dB).

	CENTER		REAR•L		REAR•R
2	3	5	6	8	9
	MENU		ENTER

5. Press TEST again to stop the test tone. TEST

4

On the front panel:

You can also use the buttons on the front panel to adjust the Surround modes. However, no test tone is available when using the buttons on the front panel. So, make adjustments while listening to the sound of the source played back.

JVC Theater Surround adjustments

Before you start, remember...

•Make sure that you have set the speaker information correctly (see page 14).

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•You cannot adjust the rear speaker output levels when you have set “REAR SPK” to “NONE.” See page 14.

•You cannot adjust the center speaker output level when you have set “CENTER SPK” to “NONE.” See page 14.

From the remote control:

1. Press SURROUND MODE	SURROUND
	MODE
repeatedly until “THEATER”
appears on the display.

•The ÙPRO LOGIC and DSP indicators also light up on the display.

SOUND

2. Press SOUND.

The 10 keys are activated for sound adjustments.

English

1. Press SURROUND ON/OFF to SURROUND ON/OFF activate an appropriate Surround mode — PRO LOGIC, DOLBY DIGITAL, DTS SURROUND or

MPEG SURROUND.

•Each time you press the button, the Surround mode turns on and off alternately.

•When “PRO LOGIC” is selected, the Ù PRO LOGIC indicator lights up on the display.

2.Adjust the speaker output levels.

1) Press (BALANCE/) SURROUND	BALANCE/SURROUND
ADJUST repeatedly until one of the		ADJUST
indications appears on the display.

3. Press TEST to check the speaker					TEST
	output balance.
					4
	“TEST TONE L” starts flashing on the
	display, and a test tone comes out of the
	speakers in the following order:
	TEST TONE L		TEST TONE C		TEST TONE R
	(Left front speaker)		(Center speaker)		(Right front speaker)
		TEST TONE LS		TEST TONE RS
		(Left rear speaker)		(Right rear speaker)

Notes:

• You can adjust the speaker output levels without outputting the
	test tone.
•	No test tone comes out of the center speaker when “CENTER
	SPK” is set to “NONE” (see page 14).
•	No test tone comes out of the rear speakers when “REAR SPK”

“CENTER LEVEL”:

To adjust the center speaker level. “REAR L LEVEL”:

To adjust the left rear speaker level. “REAR R LEVEL”:

To adjust the right rear speaker level.

2) Turn MULTI JOG to adjust the selected speaker output level (from –10 dB to +10 dB).

3) Repeat 1) and 2) to adjust the other speaker output levels.

MULTI JOG

is set to “NONE” (see page 14).

• If the TV is turned on and the proper video input is selected on

the TV, the test tone screen will appear on the TV.

4. Adjust the speaker output levels.

• To adjust the center speaker level, press CENTER –/+ (from

–10 dB to +10 dB).

• To adjust the left rear speaker level, press REAR•L –/+ (from

–10 dB to +10 dB).

• To adjust the right rear speaker level, press REAR•R –/+ (from

–10 dB to +10 dB).

CENTER REAR•L REAR•R

2	3	5	6	8	9
	MENU		ENTER

30