![Manual background](/images/new-backgrounds/29335/2933579x1.webp)
English
4. Press %/ Þto move to “SEA ADJUST.”
The SEA ADJUST menu appears.
5.Press %/ Þ/ @/ #to adjust the SEA mode as you want.
SEA ADJUST
SEA USERMODE
100 1k 10kHz
SET:MEMORY
“LFE ATT.”: | Set the low frequency effect attenuator |
| level (see page 15). |
“COMP.”: | Set the dynamic range compression |
| (see page 15). |
“DIGITAL 1/2/3”: | Set the digital input terminals |
| (see page 16). |
“FL DISP.”: | Shows the disc text information on the |
| display (see page 17). |
@/ # : Select the frequency ranges.
%/ Þ: Adjust the frequency levels.
6.Press SET to store the setting into the SEA USERMODE.
•If you press EXIT, without pressing SET in this step, you can return to the SEA menu. (The adjustment you have made is active but not stored.)
7.When you finish, press EXIT repeatedly until the menu disappears from the TV.
Setting the Basic Setting Items (Also see
pages 13 – 17)
Notes:
*Not adjustable when “CENTER SPK” is set to “NONE” (see page 14).
**Not adjustable when “REAR SPK” is set to “NONE” (see page 14).
4.When you finish, press EXIT repeatedly until the menu disappears from the TV.
Operating the Tuner (Also see pages 19 and 20)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / Þ / @/ #buttons also displays the
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the %/ Þ / @/ #buttons also displays the
MAIN MENU.
2. Press %/ Þto move |
to “TUNER |
TUNER CONTROL
MAIN MENU.
2.Press %/ Þto move to “SETTING,” then
press @/ #.
The SETTING 1 or SETTING
SETTING 1 |
|
| |
SUBWOOFER | : NO | ||
FRONT | SPK | : LARGE | |
CENTER | SPK | : SMALL | |
REAR | SPK | : LARGE | |
CNTR DELAY | : 3msec | ||
REAR DELAY | : 5msec |
CONTROL,” then |
press @/ #.
The TUNER CONTROL menu appears.
PRESET CH | : 1 |
| |
BAND |
| :FM |
|
FREQUENCY | : 87.50MHz | ||
FM MODE | :AUTO MUTING | ||
|
| ||
| PRESET MEMORY |
:OPERATE
2 menu appears.
CROSSOVER | :100Hz |
NEXT | PAGE |
3. Press %/ Þto move to the item you want to
3.Press %/ Þto move to the item you want to set or adjust, then press
@/ #.
•To go to the SETTING 2
menu, move to “NEXT PAGE,” then press @/ #.
•To go back to the SETTING
1 menu, move to “PREVIOUS PAGE,” then press @/ #.
:ENTER
SETTING 2
LFE ATT. : 0dB
COMP. : MID
DIGITAL 1 : DVD
DIGITAL 2 : CD
DIGITAL 3 : TV
FL DISP. : NORMAL
PREVIOUSPAGE
:ENTER
set or adjust, then press @/ #.
On the TUNER CONTROL menu, you can do the following:
“PRESET CH”: | Select a preset channel station. |
“BAND”: | Select the band. |
“FREQUENCY”: | Tune in a station manually. |
“FM MODE”: | Select the FM reception mode.* |
“PRESET MEMORY”: See “Storing the Preset Stations” on the next page.
Note:
* Not displayed when an AM (MW/LW) station is selected. |
On the SETTING 1 and 2 menus, you can do the following:
“SUBWOOFER”: | Set the subwoofer information (see |
| page 13). |
“FRONT SPK”: | Set the front speaker information (see |
| page 14). |
“CENTER SPK”: | Set the center speaker information (see |
| page 14). |
“REAR SPK”: | Set the rear speaker information (see |
| page 14). |
“CNTR DELAY”: | Adjust the delay time of the center |
| speaker output (see page 14).* |
“REAR DELAY”: | Adjust the delay time of the rear |
| speaker output (see page 14).** |
“CROSSOVER”: | Set the crossover frequency |
| (see page 15). |
4. When you finish, press EXIT repeatedly until the |
menu disappears from the TV. |
37