NETGEAR GS724T-300NAS manual Applying AC Power

Page 22

GS716T/GS724T Hardware Installation Guide

Insert the SFP module into the SFP module bay. Press firmly to ensure the module seats into the connector.

Figure 4-3

Step 6: Applying AC Power

NETGEAR Smart Switch does not have an ON/OFF switch. The method of applying or removing AC power is by connecting or disconnecting the power cord. Before connecting the power cord, select an AC outlet that is not controlled by a wall switch, which can turn off power to the switch. After selecting an appropriate outlet, use the following procedure to apply AC power.

1.Connect the female end of the supplied AC power adapter cable to the power receptacle on the back of the switch.

2.Connect the 3-pronged end of the AC power adapter cable to a grounded 3-pronged AC outlet. When applying power, the Power LED on the switch’s front panel is Green.

If the Power LED does not go on, check that the power cable is plugged in correctly and that the power source is good. If this does not resolve the problem, refer to Appendix A .

Installation

4-17

v1.0, January 2011

Image 22
Contents GS716T/GS724T Hardware Installation Guide NETGEAR, IncTrademarks Contents Appendix B Technical Specifications Index About This Manual Conventions, Formats and ScopeRevision History Chapter Introduction OverviewFeatures Package Contents GS716T/GS724T Hardware Installation Guide Chapter Physical Description GS716T Front and Back Panel ConfigurationSystem LEDs 10/100/1000 Mbps Ethernet Ports SFP Ports GS724T Front and Back Panel Configuration RS-232 Power ConnectorPort LED DesignationsPort LEDs DesignationSystem LEDs Device Hardware InterfacesRJ-45 Ports Factory Defaults Button SFP Gbic ModuleDesktop Switching Chapter ApplicationsApplications Characteristics Requirements Chapter InstallationPreparing the Site Installing the Switch on a Flat Surface Installing the SwitchInstalling the Switch in a Rack Checking the Installation Connecting Devices to the Switch Installing an SFP Gbic ModuleApplying AC Power Managing the Switch using a Web Browser or the PC Utility Troubleshooting Chart Appendix a TroubleshootingSymptom Cause Solution Switch Integrity Additional Troubleshooting SuggestionsConfiguration Network Adapter CardsAuto-Negotiation Management Appendix B Technical SpecificationsNetwork Protocol and Standards Compatibility InterfacePhysical Specifications Performance SpecificationsPower Supply Environmental SpecificationsModules Index NumericsGS716TGS724T Hardware Installation Guide Index-29