Clarion DRX9575Rz RDS oprations TA Traffic Announcement, Auto store function for TP stations

RDS oprations

TA (Traffic Announcement)

In TA standby mode, when a traffic announcement broadcast starts, the traffic announcement broadcast is received as top priority regardless of the function mode so you can listen to it. Traffic programe (TP) automatic tuning is also possible.

∗This function can only be used when “TP” is lit in the display. When “TP” is lit, this means that the RDS broadcast station being received has traffic announcement programes.

●Setting TA standby mode

If you press TA button 6 when only “TP” is lit in the display, “TP” and “TA” light in the display and the unit is set into TA standby mode until a traffic announcement is broadcast. When a traffic announcement broadcast starts, “TRA INFO” appears in the display. If you press TA button 6 while a traffic announcement broadcast is being received, the traffic announcement broadcast reception is canceled and the unit goes into TA standby mode.

●Canceling TA standby mode

With “TP” and “TA” lit in the display, press TA button 6. The “TA” in the display goes off and TA standby mode is canceled.

∗If “TP” is not lit, pressing TA button 6 searches for a TP station.

●Searching for a TP station

When “TP” is not lit, if you press TA button 6, the “TA” in the display lights and the unit automatically receives a TP station.

Note:

•If a TP station is not received, the unit continues the search operation. Pressing TA button 6 again goes off the “TA” in the display and stops TP station searching.

Auto store function for TP stations

You can automatically store up to 6 TP stations into preset memory. If the number of TP that can be received is less than 6, broadcast stations already stored in memory are left without being overwritten.

1.With “TA” lit in the display, press S button # to display the subdisplay.

2.Press and hold the number “2” of Preset buttons $ for 2 seconds or longer. The TP stations with the good reception sensitivity are stored into preset memory.

∗Even if you select FM1 or FM2, a TP station is stored into memory for FM3.

PTY

This function enables you to listen to a broad- cast of the selected programe type when it starts even if the unit is ON a function mode other than radio.

∗Some countries do not yet have PTY broadcast.

∗In TA standby mode, a TP station has priority over a PTY broadcast station.

●Setting PTY standby mode

1.Press S button # to display the subdisplay.

2.When you press the number “6” of Preset buttons $, “PTY” lights in the display and the PTY standby mode is turned on. When the selected PTY broadcast starts, the PTY item name appears in the display.

●Canceling PTY standby mode

1.Press S button # to display the subdisplay.

2.When you press the number “6” of Preset buttons $, “PTY” goes off in the display and PTY standby mode is canceled.

●Canceling a PTY interrupt broadcast

1.Press S button # during the PTY interrupt broadcast to display the subdisplay.

2.If you press the number “6” of Preset buttons $, the PTY interrupt is canceled and the unit returns to PTY standby mode.

Selecting PTY

1.Press S button # to display the subdisplay.

2.When you press the number “5” of Preset buttons $, the unit goes into PTY select mode.

3.Press any one of Preset buttons $ . Alternatively, turn the Rotary knob 3 clockwise or counterclockwise to select the desired PTY.

∗Below are the factory default settings stored for Preset buttons $.

Preset No.		PTY
1	NEWS	News
2	TOP 40	Top 40
3	COUNTRY	Country music
4	SOFT	Soft music
5	CLASSICL	Classic music
6	R & B	Rhythm and Blues

4.The PTY select mode is canceled automati- cally 7 seconds after a PTY is selected.

DRX9575Rz 15