Clarion DRX9575Rz owner manual Selecting a S.EQ menu, Editing/storing a S.EQ menu User memory

DSP Operations

Professional mode/S.EQ operations

Note:

•The adjustment made in professional mode is not reflected in the adjustment in easy mode. On the contrary, the adjustment made in easy mode is not reflected in the adjustment in professional mode.

S.EQ effect ON/OFF

∗The factory default setting is “ON”.

1.Press A-M button % and select “S.EQ”.

2.Press S button #. While the “ON” is lit in the display, the S.EQ effect is set to “ON”.

3.Press A-M button %.

Note:

•If the S.EQ effect is set to OFF, the adjustment made in “S.EQ operations” is not reflected in the music source.

Selecting a S.EQ menu

1.Press A-M button % to select “S.EQ”.

2.Press BAND button 4 to select “S.EQ Basic”.

3.Press one of Direct buttons $ and select the desired S.EQ menu.

∗To select the user memory, press BAND button 4 to select “S.EQ User” and then press oen of Direct buttons $.

Editing/storing a S.EQ menu (User memory)

1.Select a S.EQ menu which you want to edit on the basis of.

2.Press ADJ button &.

3.Press the right or left side of SEARCH button

2 to select the item to be adjusted.

There are DIFFUSE, CAR WIDTH and CAR LENGTH available for the items to be adjusted.

∗For details on each adjustment item, refer to the owner’s manual supplied with the DPH7500z.

4.Turn the Rotary knob 3 clockwise or counterclockwise to make the adjustment. The adjustment range is to 1 to 10 for each item.

5.Repeat steps 3 to 4 to complete the adjustment and press ADJ button &.

6.Press and hold one of Direct buttons $ for 2 seconds or longer to store the edited contents.

∗You can give a title to the user memory. For the inputting method of titles, refer to the section “Entering titles” in “Operations common to each mode”.

Professional mode/P.EQ operations

P.EQ effect ON/OFF

∗The factory default setting is “ON”.

1.Press A-M button % to select “P.EQ”.

2.Press S button #. While the “ON” is lit in the display, the P.EQ effect is set to “ON”.

3.Press A-M button %.

Note:

•If the P.EQ effect is set to OFF, the adjustment made in “P.EQ operations” is not reflected in the music source.

Selecting a P.EQ menu

1.Press A-M button % to select “P.EQ”.

2.Press BAND button 4 to select “P.EQ Basic”.

3.Press one of the Direct buttons $ and select the desired P.EQ menu.

∗To select the user memory, press BAND button 4 to select “P.EQ User” and then press one of Direct buttons $.

Editing/storing a P.EQ menu (User memory)

1.Select a P.EQ menu which you want to edit on the basis of.

2.Press ADJ button &.

3.Press the right or left side of SEARCH button 2 to select the item to be adjusted.

There are selections of correction channel, correction band, the center frequency, the Q- curve and gain adjustment available for the items to be adjusted.

∗For details on each adjustment item, refer to the owner’s manual supplied with the DPH7500z.

4.Turn the Rotary knob 3 clockwise or counterclockwise to make the adjustment.

5.Repeat steps 3 to 4 to complete the adjustment and press ADJ button &.

6.Press and hold one of Direct buttons $ for 2 seconds or longer to store the edited contents.

∗You can give a title to the user memory. For the inputting method of titles, refer to the section “Entering titles” in “Operations common to each mode”.

DRX9575Rz 29