NETGEAR GS110TP-100NAS manual LED Designations, Port LEDs

GS110TP Hardware Installation Guide

•Power and Status LED

•PoE Max LED

Figure 2-2illustrates the NETGEAR GS110TP Smart PoE Switch back panel.

Power Connector

Figure 2-2

The back panel contains the following:

•A DC input for the supplied 48V/1.25A external power adapter

LED Designations

Port LEDs

The following table describes the RJ-45 and SFP port LED designations. There are two LEDs for each RJ-45 port. Each SFP port has its own indication LED.

Table 2-1. Port LEDs

LED	Designation
Speed/Link/Activity	• Off = No link is established on the port.
(Left LED on each RJ-45 port)	• Solid Green = A valid 1000 Mbps link is established on the port.
	• Flashing Green = Packet transmission or reception is occurring on
	the port at 1000 Mbps.
	• Solid Yellow = A valid 10/100 Mbps link is established on the port.
	• Flashing Yellow = Packet transmission or reception is occurring on
	the port at 10/100 Mbps.

2-2 Physical Description

v1.0, March 2010