NETGEAR GS110TP-100NAS Checking the Installation, Connecting Devices to the Switch, Desktop PC

GS110TP Hardware Installation Guide

Step 3: Checking the Installation

Before applying power to the switch, perform the following:

•Inspect the equipment thoroughly.

•Verify that all cables are installed correctly.

•Check cable routing to make sure cables are not damaged or creating a safety hazard.

•Ensure all equipment is mounted properly and securely.

Step 4: Connecting Devices to the Switch

The following procedure describes how to connect PCs to the switch’s RJ-45 ports. The GS110TP Smart PoE Switch contains Auto Uplink technology, which allows the attaching of devices using either straight-through or crossover cables.

Link/Act PoE PROSAFE GS110TP

	Link/Act Mode
	Green=Link at 1000M
PoE Max	Yellow=Link at 100M/10M
	Blink=ACT

PoE Mode
Green=PoE Powered		9F	10F
Yellow=PoE Fault	PoE	Link/Act	Link/Act
	Ports

`	`
Desktop PC	Desktop PC

Figure 4-1

Installation 4-3

v1.0, March 2010