NETGEAR GS700AT Series manual GS748AT Front Panel, Back Panel

GS700AT Hardware Installation Guide

GS748AT Front Panel

The GS748AT is a 48-Ports 10/100/1000M + 4 SFP Combo ports Smart switch. Every RJ45 port is capable of sensing the line speed and negotiating the operation duplex mode with the link partner automatically.

Figure 3-2illustrates the NETGEAR GS748AT Smart Switch front panel.

Figure 3-2

The front panel contains the following:

•48 RJ-45 connectors for 10/100/1000Mbps auto sensing Gigabit Ethernet switching ports.

•Four SFP slots for SFP modules supporting 1000 (1000Base-SX/LX)/100M SFP.

•Reset button to restart the device.

•Recessed default reset button to restore the device back to the factory defaults.

•Port LEDs.

•System LEDs.

Back Panel

Figure 3-3illustrates the NETGEAR GS700AT Smart Switch back panel:

Figure 3-3

The back panel contains the following:

•A 100-240VAC/50-60 Hz universal input, which is a standard AC power receptacle for accommodating the supplied power cord.

3-2 Physical Description

v1.0, October 2008