Other Handy Functions
Adjusting the display contrast
You can adjust the display contrast according to the angle of installation of the unit.
∗The factory default setting is “6”. (Adjustment level: 1 to 11)
1.Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display.
2.Press the right or left side of SEARCH button
% to select “CONTRAST”.
3.Press ENT button 2.
4.Turn the Rotary knob & clockwise or counterclockwise to adjust the contrast.
5.Pressing ENT button 2 returns to the adjustment selection display.
6.Press ADJ button 4 to return to the previous mode.
Setting the SEARCH button illumination color (Prism function)
The change in the SEARCH button illumination color according to the unit operating state is called the “Prism function”. You can set the illumination pattern you prefer.
∗The factory default setting is “PATTERN 1”.
1.Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display.
2.Press the right or left side of SEARCH button
% to select “PRISM KEY”.
3.Press ENT button 2.
4.Turn the Rotary knob & clockwise or counterclockwise to set the illumination
pattern. Each time you turn the Rotary knob &, the illumination pattern changes in the following order:
PATTERN 1 ➜ PATTERN 2 ➜ OFF ➜ PATTERN 1...
PATTERN 1:
The color changes for each function mode, station tuning, scanning and other operations.
PATTERN 2:
In addition to the changes in Pattern 1, the color changes according to the audio level.
OFF:
The color changes according to the function mode.
5.Pressing ENT button 2 returns to the adjustment selection display.
6.Press ADJ button 4 to return to the previous mode.
Message display
When the unit is powered on or off, a message is displayed. The user can turn this message display on or off.
∗The factory default setting is “ON”.
1.Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display.
2.Press the right or left side of SEARCH button
% to select “MESSAGE”.
3.Press ENT button 2.
4.Turn the Rotary knob & clockwise to set the message display to “ON”; turn it counterclockwise to set the message display to “OFF”.
5.Pressing ENT button 2 returns to the adjustment selection display.
6.Press ADJ button 4 to return to the previous mode.
NON-FADER output adjustment display on/off
If you do not want to adjust the
∗The factory default setting is “ON”.
∗Even if you set the level adjustment display to “OFF”, a signal is output from the
1.Press and hold ADJ button 4 for 1 second or longer to switch to the adjustment selection display.
2.Press the right or left side of SEARCH button
% to select
3.Press ENT button 2.
4.Turn the Rotary knob & clockwise to set the
ON:
When
∗ You can adjust the output level.
OFF:
Even when you press
∗ You cannot adjust the output level.
5.Pressing ENT button 2 returns to the adjustment selection display.
6.Press ADJ button 4 to return to the previous mode.
Triggered audio mute for cellular telephones
This unit requires special wiring to mute the audio signal automatically when a cellular telephone rings in the car.
∗This function is not compatible with all cellular telephones. Contact your local authorized Clarion dealer for information on proper installation and compatibility.
DRX8675z 17