X550 User Guide
Product Registration
The X550 PCI card contains an embedded hardware license which allow it to support up to five access devices. When first installed, the X550 starts a trial license which permits you to use full functionality of up to five attached access devices for the next 30 days. Until you register, a reminder screen like the one shown below will be displayed at least once a day on every user station. If you fail to register the X550 card with NComputing (online or offline) within the
Allowing the card’s trial license to expire will not prevent you from registering the card. You can always launch the vSpace Registration application from the PC’s main screen, via
Start > All Programs > vSpace > vSpace Registration
and then perform either online or offline registration. Full PCI card functionality will then be restored once the card is successfully registered with NComputing.
NOTE: If you have two X550 cards installed in the system, the vSpace Registration application will present the option of registering both cards at the same time.
NOTE: In addition to extending the X550 license beyond the
Select "vSpace Registration" from the Windows Start menu.
Page 18