NetComm NP6800 manual Glossary

Page 37

Glossary

A

Ad-Hoc Mode - A client setting that provides independent peer to peer connectivity in a wireless LAN. An alterative setup is where PCs communicate with each other through an access point.

B

Bandwidth - The transmission capacity of a given facility, in terms of how much data the facility can transmit in a fixed amount of time; expressed in bits per second (bps).

Bit - A binary digit. The value - 0 or 1-used in the binary numbering system. Also, the smallest form of data.

D

Default Gateway - The routing device used to forward all traffic that is not addressed to a station within the local subnet.

DHCP server and client - DHCP stands for Dynamic Host Configuration Protocol. This protocol is designed to automatically load parameters for the TCP/IP network, including the IP address, host name, domain name, netmask, default gateway, and name server address. The machine that provides this service is called the DHCP server, and its client computers are called DHCP clients. If client computers support DHCP, a TCP/IP configuration is not needed on each client computer.

Domain - A subnetwork comprised of a group of clients and servers under the control of one security database. Dividing LANs into domains improves performance and security.

Driver - A workstation or server software module that provides an interface between a network interface card and the upper-layer protocol software running in the computer; it is designed for a specific NIC, and is installed during the initial installation of a network- compatible client or server operating system.

DSSS (Direct-Sequencing Spread-Spectrum) - DSSS operate over the radio airwaves in the unlicensed ISM band (industrial, scientific, medical). DSSS uses a radio transmitter to spread data packets over a fixed range of frequency band.

E

Encryption - A security method that applies a specific algorithm to data in order to alter the data's appearance and prevent other devices from reading the information.

Ethernet - The most widely used LAN access method which is defined by the IEEE

802.3standard. Ethernet is normally a shared media LAN meaning all devices on the network segment share total bandwidth. Ethernet networks operate at 10Mbp using CSMA/CD to run over 10Base T cables.

F

Fragmentation Threshold Value - Indicates how much of the network resources is devoted to recovering packet errors. The value should remain at its default setting of 2,432. If you experience high packet error rates, you can decrease this value but it will likely decrease overall network performance. Only minor modifications of this value are recommended.

Fragmentation - Breaking a packet into smaller units when transmitting over a network medium that cannot support the original size of the packet.

I

IP Address - An IP address is a 32-bit number that identifies each sender & receiver of information that is sent across the Internet. An IP address has two parts: the identifier of a particular network on the Internet and one identifier of a particular device (which can be a server or a workstation within that network).

L

LAN - A local area network (LAN) is a group of computers and associated devices that share a common communications line and typically share the resources of a single processor or server within a small geographic area (for example, within an office building).

M

MAC Address - 12-digit hexadecimal number that identifies a networking product on the network.

Mbps (Megabits per second) - One million bits per second; unit of measurement for data transmission.

Rev.1 - YML655

www.netcomm.com.au

NP6800 - Wireless LAN Access Point

Page 37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Page Contents Introduction NetComm NP6800 Wireless LAN Access Point LED Descriptions About the NetComm NP6800 Wireless LAN Access PointAd-Hoc Ibss Mode Wireless LAN BasicsInfrastructure ESS or 802.11-Station Mode Mbps Operation Signal RangeRev.1 YML655 NP6800 Wireless LAN Access Point Installation Rev.1 YML655 NP6800 Wireless LAN Access Point Installing the Wlan Driver in Windows 98/ME/2000 Driver Installation & ConfigurationInstalling the Driver in Windows XP Installing the Access Point Utility Uninstallation Procedure Configuring the Access Point via USB Configuring the Access PointSubnet Mask IP AddressWEP Community passwordRev.1 YML655 NP6800 Wireless LAN Access Point Assigning a Temporary IPAddress Configuring the Access Point via EthernetConnecting to the Access Point using the Snmp Manager Rev.1 YML655 File Menu IP Configuration Setup MenuBridge Operational Settings Wireless LANRev.1 YML655 Authorized MAC Address MAC Address Filter Access Point Mode Operation ModeWireless Bridge Mode Access Point Client ModeClick Point to Point Point to PointPoint to MultiPoint Enable Snmp traps Commands Menu AuthorizationField name Description Info MenuNetwork Menu Traps MenuAbout Menu Window MenuNetwork Topology Advanced TopicsHow to Make Your Wireless Network More Secure Glossary Rev.1 YML655 Windows Troubleshooting Tips TroubleshootingNew Settings Default SettingsContact Information Trademarks and NoticesWarranty Registration Form Page Limitations of Warranty Product Warranty

NP6800 specifications

The NetComm NP6800 is a robust and versatile networking device designed to cater to the needs of modern businesses and consumers looking for high-performance connectivity solutions. This device stands out due to its compelling features, cutting-edge technologies, and remarkable characteristics, making it an ideal choice for diverse applications.

One of the key features of the NetComm NP6800 is its support for advanced broadband technologies, including VDSL2, ADSL2+, and ADSL. This wide-ranging compatibility ensures that users can seamlessly connect to different types of internet services, enhancing flexibility and minimizing disruptions during transitions between service providers or technologies. The device's VDSL2 capabilities, in particular, allow for high-speed internet access, providing download speeds of up to 100 Mbps, which is essential for businesses that require considerable bandwidth for tasks like video conferencing, large file transfers, and cloud services.

The NP6800 is also equipped with multiple Ethernet ports, enabling users to connect various devices to the network simultaneously. This feature is beneficial in environments where multiple users depend on stable internet connections for work or entertainment purposes. Additionally, the device offers a clear and intuitive user interface, facilitating easy setup and management even for those with limited technical knowledge.

In terms of wireless capabilities, the NetComm NP6800 supports dual-band Wi-Fi, allowing users to take advantage of both 2.4 GHz and 5 GHz frequencies. This dual-band support helps minimize interference and enhances overall network performance, catering to varying device requirements, from streaming high-definition content to casual web browsing. The NP6800 also incorporates advanced security protocols, including WPA3, to safeguard users' data against unauthorized access, ensuring a secure browsing experience.

Moreover, the NetComm NP6800 supports Quality of Service (QoS) features, allowing users to prioritize critical applications and allocate bandwidth accordingly. This prioritization ensures that essential tasks, such as voice calls and video conferencing, receive the necessary bandwidth, thereby enhancing overall user experience.

In conclusion, the NetComm NP6800 offers a comprehensive blend of features and technologies designed to meet the demands of modern connectivity. With its robust performance, extensive compatibility, and emphasis on security, the NP6800 emerges as a reliable choice for both home and business environments, making it a worthy investment for anyone seeking a dependable networking solution.
Top Page Image Contents