NetComm NP6800 manual Contact Information, Trademarks and Notices, Default Settings, New Settings

Page 40

Registering your NetComm Product

To ensure that the conditions of your warranty are complied with, please go to the NetComm web site for quick and easy registration of your product at

www.netcomm.com.au

Alternatively, you can fill in the Warranty Registration Form and mail it to NetComm Limited, PO Box 1200, Lane Cove NSW 2066.

Contact Information

If you have any technical difficulties with your product, please do not hesitate to contact NetComm’s Customer Support Department.

Email:support@netcomm.com.au

Fax:

(02) 9424-2010

Web:www.netcomm.com.au

Trademarks and Notices

NetComm™ is a trademark of NetComm Limited. Windows® is a registered trademark of Microsoft Corporation. Other brand and product names are trademarks or registered trademarks of their respective holders. Information is subject to change without notice. All rights reserved.

Please note that the images used in this document may vary slightly from those of the actual product. Specifications are accurate at the time of the preparation of this document but are

subject to change without notice.

Default Settings

IP Address:

192.168.168.10

Subnet Mask:

255.255.255.0

Community (password):

public

New Settings

IP Address:

_______ . _______ . _______ . ________

Subnet Mask:

_______ . _______ . _______ . ________

Community (password):

__________________________________

www.netcomm.com.au

Rev.1 - YML655

Page 40

NP6800 - Wireless LAN Access Point

Image 40
Contents Page Contents Introduction About the NetComm NP6800 Wireless LAN Access Point NetComm NP6800 Wireless LAN Access Point LED DescriptionsAd-Hoc Ibss Mode Wireless LAN BasicsInfrastructure ESS or 802.11-Station Mode Signal Range Mbps OperationRev.1 YML655 NP6800 Wireless LAN Access Point Installation Rev.1 YML655 NP6800 Wireless LAN Access Point Driver Installation & Configuration Installing the Wlan Driver in Windows 98/ME/2000Installing the Driver in Windows XP Installing the Access Point Utility Uninstallation Procedure Configuring the Access Point Configuring the Access Point via USBIP Address Subnet MaskCommunity password WEPRev.1 YML655 NP6800 Wireless LAN Access Point Configuring the Access Point via Ethernet Assigning a Temporary IPAddressConnecting to the Access Point using the Snmp Manager Rev.1 YML655 File Menu IP Configuration Setup MenuBridge Wireless LAN Operational SettingsRev.1 YML655 Authorized MAC Address MAC Address Filter Operation Mode Access Point ModeAccess Point Client Mode Wireless Bridge ModePoint to Point Click Point to PointPoint to MultiPoint Enable Snmp traps Authorization Commands MenuInfo Menu Field name DescriptionTraps Menu Network MenuWindow Menu About MenuAdvanced Topics Network TopologyHow to Make Your Wireless Network More Secure Glossary Rev.1 YML655 Troubleshooting Windows Troubleshooting TipsDefault Settings New SettingsContact Information Trademarks and NoticesWarranty Registration Form Page Product Warranty Limitations of Warranty