NetComm NB620W manual Legal & Regulatory Information, Customer Information

Page 2

Legal & Regulatory Information

This manual is copyright. Apart from any fair dealing for the purposes of private study, research, criticism or review, as permitted under the Copyright Act, no part may be reproduced, stored in a retrieval system or transmitted in any form, by any means, be it electronic, mechanical, recording or otherwise, without the prior written permission of NetComm Limited. NetComm Limited accepts no liability or responsibility, for consequences arising from the use of this product.

NetComm Limited reserves the right to change the specifications and operating details of this product without notice.

NetComm is a registered trademark of NetComm Limited.

All other trademarks are acknowledged the property of their respective owners.

Customer Information

ACA (Australian Communications Authority) requires you to be aware of the following information and warnings:

(1)This unit shall be connected to the Telecommunication Network through a line cord which neets the requirements of the ACA TS008 Standard.

(2)This equipment has been tested and found to comply with the Standards for C-Tick and or A- Tick as set by the ACA . These standards are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio noise and, if not installed and used in accordance with the instructions detailed within this manual, may cause interference to radio communications. However, there is no guarantee that interference will not occur with the installation of this product in your home or office. If this equipment does cause some degree of interference to radio or television reception, which can be determined by turning the equipment off and on, we encourage the user to try to correct the interference by one or more of the following measures:

Change the direction or relocate the receiving antenna.

Increase the separation between this equipment and the receiver.

Connect the equipment to an alternate power outlet on a different power circuit from that to which the receiver/TV is connected.

Consult an experienced radio/TV technician for help.

(3)The power supply that is provided with this unit is only intented for use with this product. Do not use this power supply with any other product or do not use any other power supply that is not approved for use with this product by NetComm. Failure to do so may cause damage to this product, fire or result in personal injury.

Important rules for safe operation

In addition to the careful attention devoted to quality standards on the manufacture of network products, safety is a major factor in the design of every product. However, safety is your responsi- bility, too. This section lists the gateway and accessory equipment. Please read them carefully before operation and using the gateway.

Read and follow instructions- You should read all the safety and operating instructions before operating the gateway.

Retain Instructions- You should save all the safety and operating instructions, for future reference.

NB620W Super-G Wireless Broadband Gateway User Guide

YML725 Rev1

2

www.netcomm.com.au

Image 2
Contents Page Important rules for safe operation Legal & Regulatory InformationCustomer Information NB620W Super-G Wireless Broadband Gateway User Guide Contents Introduction Product OverviewFeatures and benefits NetComm NB620W Super-G Wireless GatewayWhats in the package? Connect the Ethernet Cables Connecting the NetComm Super-G Wireless GatewayConnecting your Gateway 1 NB620W Front Panel 2 NB620W Back Panel Connect the Power CableDevice Management / Gateway Address Factory DefaultLog-in Default Values SsidConfiguring your Computers OverviewConfiguring Windows 98 and Millennium PCs Page Configuring Windows 2000 PCs Page Configuring Windows XP PCs Page Configuring the Wireless Gateway Accessing the Configuration ManagerInternet Port Basic ConfigurationDhcp Configuration PPPoE Configuration Page Static IP Configuration Pptp Configuration YML725 Rev1 Local Port YML725 Rev1 Wireless LAN YML725 Rev1 Page Advanced Setup Access Control List Advanced ItemsDefine Group Options Define Application Options Advanced Setup Content filtering YML725 Rev1 Advanced Setup Dynamic DNS Advanced Setup Firewall Email Alarm Options Advanced Setup Remote Management Advanced Setup Static Routes Advanced Setup UPnP Advanced Setup Virtual Server YML725 Rev1 Advanced Setup Print Server Advanced Setup USB Storage Page YML725 Rev1 Management Management Access LogManagement Factory Reset Management Firmware Upgrade Management Network Status User ListSession List Management Save Configuration Management TimeConfiguring Printer Sharing To enable the printer serving function of NB620W to operatePage YML725 Rev1 Page Configuring Printer Sharing on Windows Page YML725 Rev1 Page YML725 Rev1 Configuring NB620W Printer Sharing on Windows XP PCs YML725 Rev1 Page YML725 Rev1 Page Appendix a Technical Specifications Access InterfaceHardware Software Networking /Transport layer protocolFile sharing support What is Dynamic DNS? Why Dynamic DNS? What is Wildcard? What is a dynamic IP address?What is DMZ? Appendix B Frequent Asked QuestionsWhat is MTU? Whats MX Mail Exchanger? And why MX?What is PPPoE PPP Over Ethernet? What to do if my USB storage stalls?Refresh your IP address MS Windows Appendix C TroubleshootingCannot access the Internet IP address conflictAppendix D Ddns Update Status Messages Twisted pair cables Appendix E Cable ConnectionsRJ-45 Network Ports RJ-11 Connector Pin RS-232 Serial Cable To RJ-11 adapterUSB cable Contact Information Appendix F Registering your NetComm ProductLegal & Regulatory Information Customer Information Product Warranty Limitations of Warranty