NetComm NB620W manual Configuring Printer Sharing

Chapter 4 Configuring Printer Sharing

4.1Configuring Printer Sharing on Windows98 SE or Millennium PCs

1.After you have installed the third party print monitor system, run the Add Printer Wizard from Start -> Setup -> Printers -> Add a Printer. Select Local Printer and then click Next.

2.Select the printer manufacturer and type that you want to hook up with the NB620W to install the driver or click Have Disk for the drivers on your disk or a CD-ROM.

Note:	Microsoft Windows 98 or ME does not support the LPR protocol which is needed
	to enable the printer serving function of NB620W to operate.
	If you are using Windows 98 or ME, you must install a third party LPR Utiliity
	driver to allow Windows 98 or ME to redirect your print job to an IP address.
	Please visit http://www.axis.com/techsup/software/ to download their free
	Print Monitor for Windows.
	If you are running a Windows 2000 or XP system, you will not need this third
	party utility as these two operating systems support the LPR Protocol as
	standard.

YML725 Rev1	NB620W Super-G Wireless Broadband Gateway User Guide
www.netcomm.com.au	53