Packet Size (MTU). The Maximum Transmission Unit of an IP packet. The default value is 1492 Bytes. If your ISP requires a special value, select this from the pull down menu. The default value will work for most cases. Alternatively, contact your ISP for a specified value.
Disconnect after idle time. The PPPoE connection will be disconnected by the gateway automatically when there is no Internet traffic for the idle time specified. An idle time of “0” means an
Enable Unnumbered PPP Connection. When unnumbered function is used in PPTP, check this box and enter the IP address of the unnumbered connection. Check with your ISP if you are unsure.
Use Static DNS. If you want to use your own DNS instead of the one provided by your ISP, check this box and enter the IP address of the DNS in the field. (At least one for the primary field.)
MAC address. Some ISPs allow you to connect to them with a specified MAC address only. You can enter the MAC address manually or copy it from a PC which is attached to the Local Port. Simply type in its IP address and the gateway will copy the MAC address from that PC. The gateway comes with the factory default MAC address. You do not need to change the default value if the ISP is not checking the MAC address of your Internet Port.
YML725 Rev1 | NB620W |
www.netcomm.com.au | 25 |