NetComm N3G002W manual Click Save to save the settings and Undo to cancel

Page 32

c)WPA-PSK/WPA2-PSK : A newer type of security is WPA-PSK-TKIP and WPA-PSK2-ADE. This type of security gives a more secure network compare to WEP. Use TKIP Encryption Type for WPA-PSK and AES for WPA2-PSK. After that, please enter the key in the Passphrase field. The key needs to be more then 8 characters and less then 63 characters and it can be any combination of letters and numbers. Please note that the configuration for WPA-PSK and WPA2-PSK is identical

d)WPA/WPA2 : Similar to 802.1X security but with TKIP or AES Encryption. You need to have a RADIUS server on the network to perform user authentication. Please type in the details for your RADIUS server in the fields required.

Notes: After configuring wireless security, you also need to configure your wireless adapter to use the same security settings before you can connect wirelessly. Not all wireless adapter supports WPA-PSK/WPA2-PSK/WPA/WPA2 security, please refer to your wireless adapter user guide for more details.

It is strongly recommended to set up a simple wireless security such as WEP 64bit or WPA (when the wireless client supports WPA) in order to secure your network.

Click Save to save the settings and Undo to cancel.

N3G002W 3G Wireless Router User Guide	YML894 Rev1
32	www.netcomm.com.au

Image 32

Contents

User Guide Contents YML894 Rev1 Overview N3G002W Features VPNPackage Contents Minimum System RequirementsLED Indicators Back Panel PortsRestoring Factory Defaults Default SettingsConnecting your N3G002W Wireless Router StepStep Step Windows 2000 PCs Setting up your ComputerWindows XP PCs Windows Me PCs Windows 95, 98 PCsWindows Vista Mac OSXUsing the N3G002W Configuration Wizard Click on Wizard and then on Enter APN Access Point Name for various providers APNN3G002W 3G Wireless Router User Guide YML894 Rev1 WAN IP address that has been assigned Advanced Setup Basic Setting Basic Setting Primary Setup Static IP Address Dynamic IP AddressAuto-reconnect- Tick to enable auto reconnect function Dynamic IP Address with Road Runner Session ManagementL2TP Pptp IBurst Basic Setting Dhcp Server Basic Setting Wireless YML894 Rev1 Click Save to save the settings and Undo to cancel YML894 Rev1 Basic Setting Change Password Forwarding Rules Service Port Server IP Enable Forwarding Rules Virtual ServerForwarding Rules Special AP Forwarding Rules Miscellaneous Security Setting Security Setting Packet Filters Inbound Filter Security Setting Domain Filters Security Setting URL Blocking Security Setting MAC Control Security Setting Miscellaneous Advanced Setting Advanced Setting System Log Advanced Setting Dynamic DNS Advanced Setting QoS Advanced Setting Snmp To Enable SNMP, you need to set the followingAdvanced Setting Routing Advanced Setting System Time Advanced Setting Scheduling Advanced Setting Performance Tool Box Tool Box Restore Setting Tool Box System InfoTool Box Firmware Upgrade Tool Box Backup SettingTool Box Reset to Default Tool Box RebootTroubleshooting Why my wireless client can not access the Internet?Do not remember my encryption key. What should I do? Why does my wireless connection keep dropping?Can not establish a wireless connection? What is VPN? What can I do if my Ethernet cable does not work properly?Appendix a Establishing your wireless Windows XP service packN3G002W 3G Wireless Router User Guide Mac OSX N3G002W 3G Wireless Router User Guide Windows Vista N3G002W 3G Wireless Router User Guide Now the connection is ready Appendix B How to configure WEP/WPA-PSK Wireless Security YML894 Rev1 Appendix C Legal & Regulatory Information Customer InformationProduct Warranty Limitations of WarrantyProduct Warranty Contact Information