Pioneer 655A, DV-656A The Initial Settings Menu Using the Initial Settings menu, Digital Out

The Initial Settings Menu

Using the Initial Settings menu

The Initial Settings menu is where you can set preferences for language, audio and video output, and so on.

If a menu option is grayed out it means that it cannot be changed at the current time. This is usually because a disc is playing. Stop the disc, then change the setting.

1Press SETUP and select ‘Initial Set- tings’ from the on-screen display.

Audio Settings	Video Adjust
Play Mode	Disc Navigator
Initial Settings	Setup Navigator

Initial Settings
Digital Audio Out	Digital Out	On
Video Output	Dolby Digital Out	Off
Language	DTS Out
Display	Linear PCM Out
Options	MPEG Out
Speakers

If at any time you need to switch off the digital audio output, set this to Off, other- wise leave it On.

•You can’t switch on/off the optical and coaxial outputs individually.

•There is no digital output when playing SACDs and some DVD-Audio discs regardless of this setting.

08

2Select the setup category from the list on the left, then select an item from the menu list to the right.

3Make the setting you want.

•The language options shown in the on- screen display illustrations on the following pages may not correspond to those available in your country or region.

Digital Audio Out settings

Digital Out

• Default setting: On

You only need to make this setting if you connected this system to an AV receiver (or other component) using one of the digital outputs.

Dolby Digital Out

• Default setting: Dolby Digital

You only need to make this setting if you connected this system to an AV receiver (or other component) using one of the digital outputs.

Initial Settings
Digital Audio Out	Digital Out
		Dolby Digital
Video Output	Dolby Digital Out	Dolby Digital > PCM
Language	DTS Out
Display	Linear PCM Out
Options	MPEG Out
Speakers

If your AV receiver (or other connected component) is Dolby Digital compatible, set to Dolby Digital, otherwise set to Dolby Digital > PCM.

51

En