Pioneer DV-656A, 655A The Initial Settings Menu, DTS Out, Linear PCM Out, MPEG Out

08The Initial Settings Menu

DTS Out

• Default setting: DTS > PCM

You only need to make this setting if you connected this system to an AV receiver (or other component) using one of the digital outputs.

Initial Settings
Digital Audio Out	Digital Out	DTS
Video Output	Dolby Digital Out	DTS > PCM
Language	DTS Out
Display	Linear PCM Out
Options	MPEG Out
Speakers

If your AV receiver (or other connected component) has a built-in DTS decoder, set this to DTS, otherwise set to DTS > PCM (DTS audio is converted to more compatible PCM audio). Check the manual that came with the other component if you’re unsure whether it is DTS compatible.

•If you set to DTS with a non-DTS compatible amplifier, noise will be output when you play a DTS disc.

•This setting applies only to DTS audio on DVDs. DTS-CD always output DTS digital audio as-is regardless of this setting.

Linear PCM Out

• Default setting: Down Sample On

You only need to make this setting if you connected this system to an AV receiver (or other component) using one of the digital outputs.

52

En

Initial Settings
Digital Audio Out	Digital Out	Down Sample On
Video Output	Dolby Digital Out	Down Sample Off
Language	DTS Out
Display	Linear PCM Out
Options	MPEG Out
Speakers

If your AV receiver (or other connected component) is compatible with high sampling rates (96 kHz), set this to Down Sample Off, otherwise set it to Down Sample On (96 kHz audio is converted to a more compatible 48 kHz). Check the manual that came with the other component if you’re unsure whether it is 96 kHz compatible.

•Even when set to Down Sample Off, some discs will still output down- sampled audio through the digital outputs (you only get full sampling rate audio through the analog outputs).

•High sampling rate DVD-Audio discs (192kHz or 176.2kHz) automatically output down-sampled audio through the digital outputs.

MPEG Out

• Default setting: MPEG > PCM

You only need to make this setting if you connected this system to an AV receiver (or other component) using one of the digital outputs.

Initial Settings
Digital Audio Out	Digital Out	MPEG
Video Output	Dolby Digital Out	MPEG > PCM
Language	DTS Out
Display	Linear PCM Out
Options	MPEG Out
Speakers