Pioneer DV-656A, 655A operating instructions The Audio Settings Menu Channel Level

06The Audio Settings Menu

Channel Level

• Default setting: Fix

This setting allows you to set the level of each channel sent to the 5.1 channel analog outputs.

1Press SETUP and select ‘Audio Set- tings’ from the on-screen display.

Audio Settings	Video Adjust
Play Mode	Disc Navigator
Initial Settings	Setup Navigator

2Highlight Channel Level, then use the / buttons (cursor left/right) to change to ‘Fix’ or ‘Variable’, as required.

Audio Settings	1/ 1
Audio DRC	Off
Virtual Surround	Off
Channel Level	Fix

•Fix – Channel levels are fixed

•Variable – You can specify variable channel levels

3If you chose Variable, press (cursor down) to proceed to the next screen.

Audio Settings	1/ 2
Audio DRC	Off
Virtual Surround	Off
Channel Level	Variable

4Variable setting only: Set the channel levels for each speaker.

Audio Settings	2/ 2
Channel Level L	0.0 dB
Channel Level C	0.0 dB
Channel Level R	0.0 dB
Channel Level RS	0.0 dB
Channel Level LS	0.0 dB
Channel Level SW	0.0 dB

•Use the / buttons (cursor up/down) to select a speaker.

•Use the / buttons (cursor left/right) to adjust the channel level for that speaker.

Channel levels can be set from –6 dB to +6 dB. in 0.5 dB increments.

5Press ENTER to make the settings and exit the audio settings screen.

•You can’t adjust the channel level for any speakers that are set to Off in the Speaker Installation menu screen (page 62).

•The Fix setting is equivalent to setting all the channel levels to +6 dB. There- fore, the Variable setting will usually sound quieter than the Fix setting.

48

En