Pioneer 655A, DV-656A Additional Information Setting the TV System, Watching Ntsc on a PAL TV

Additional Information

Setting the TV System

(Except DV-656A and DV-655A Taiwan model)

The default setting of this player is AUTO, and unless you notice that the picture is distorted when playing some discs, you should leave it set to AUTO. If you experi- ence picture distortion with some discs, set the TV system to match your country or region’s system. Doing this, however, may restrict the kinds of disc you can watch. The table below shows what kinds of disc are compatible with each setting (AUTO, PAL and NTSC).

1If the player is on, press STANDBY/ ON to switch it to standby.

2Using the front panel controls, hold

down ¡ ¢ then press STANDBY/ON to switch the TV system.

The TV system changes as follows:

AUTO = NTSC

NTSC = PAL PAL = AUTO

The player’s display shows the new setting.

•You have to switch the player into standby (press STANDBY/ON) before each change.

Disc		Player setting
Type	Format	NTSC	PAL	AUTO
DVD/Super VCD	NTSC	NTSC	MOD.PAL	NTSC
	PAL	––	PAL	PAL
Video CD	NTSC	NTSC	MOD.PAL	NTSC
	PAL	NTSC	PAL	PAL
CD / no disc	––	NTSC	PAL	NTSC or PAL

09

Watching NTSC on a PAL TV

Most models of the newly developed countdown PAL TV system detect 50 Hz (PAL)/60 Hz (NTSC) and automatically switch vertical amplitude, resulting in a display without vertical shrinkage.

If your PAL TV does not have a V-Hold control, you may not be able to watch NTSC discs because of picture roll. If the TV has a V-Hold control, adjust it until the picture stops rolling.

On some TVs, the picture may shrink vertically, leaving black bands at the top and bottom of the screen. This is not a malfunc- tion; it is caused by the NTSC to PAL conversion.

73

En