NetComm HS960 manual RJ-45 Ethernet Port, 100Mbps Use EIA/TIA-568-100-Category 5 cable

Page 117

Appendix A Signal Connection Arrangements

RJ-45 Ethernet Port

The HS960 RJ-45 Ethernet port can connect to any networking devices that use a standard LAN interface, such as a Hub/Switch Hub or Router. Use unshielded twisted-pair (UTP) or shield twisted-pair (STP) cable to connect the networking device to the RJ-45 Ethernet port.

Depending on the type of connection, 10Mbps or 100Mbps, use the following Ethernet cable, as prescribed. 10Mbps: Use EIA/TIA-568-100-Category 3, 4 or 5 cable.

100Mbps: Use EIA/TIA-568-100-Category 5 cable.

Figure A-1 RJ-45 Connector and Cable Pins

Note: To prevent loss of signal, make sure that the length of any twisted-pair connection does not exceed 100 meters.

Appendix B Regulations/EMI Compliance

FCC Regulatory Statement

Part 15-Class B compliant device

This device complies with Part 15 of the FCC Rules. Operation is subject to the following conditions:

1This device may not cause harmful interference, and

2This device must accept any interference received, including that which may cause undesired operation.

This equipment has been test and found to comply with the limits for a computing device, pursuant to Part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1Reorient or relocate the receiving antenna.

2Increase the separation between the equipment and receiver.

3The equipment and the receiver should be connected the outlets on separate circuits.

4Consult the dealer or an experienced radio/television technician for help.

Changes or modification not expressly approved be the party responsible for compliance could void the user’s authority to operate the equipment.

YML857 Rev1

HS960 Wireless Gateway User Guide

www.netcomm.com.au

117

Page 116 Page 118
Image 117
Page 116 Page 118
Contents User Guide HS960 Wireless Gateway User Guide Contents 101 Pass Through AccountingAdvertisements FilteringPackage Contents Precautions FeaturesTop Panel LEDs Indication Overview of the HS960 Wireless GatewayRear panel of the HS960 is shown below LAN Rear PanelConnection Diagram Hardware Specifications Technical SpecificationsNTP Network Time Protocol Support Software SpecificationsYML857 Rev1 Wall-Mounting InstallationConnecting the Antennas Installation RequirementsSystem Requirements Dynamic IP settings for the PC ISP RequirementsYour PC Requirements HS960 Connection Getting StartedPOE Connection POE Power over Ethernet ApplicationSet Up Wizard ConfigurationStartup Wizard set up screen Internet Connection Setting Screen Internet Connection SettingsProvided by your ISP Default DescriptionPPPoE Point-to-Point Protocol over Ethernet Pptp Client Point-to-Point Tunneling Protocol Internet Connection Setting Screen-PPTP Client SettingPPP MTU Setting 1460 TCP MSS Setting 1400Connection ID/Name Empty Wireless Wireless SettingChannel Enter the channel ID for wireless connection EssidEmail Server’s IP Empty Mail Server SettingAddress or Domain Name Exceed 50 characters Smtp PortYes Authentication Service SettingsBilling Profile Settings 13 Printer Setting Screen Account Generator Printer SettingThree-buttons Printer Setting Accounting SettingWeb-based Account Generator Setting Password AccountConfirm Empty Enter the password for confirmation 18 Account Generator Panel Click on button to create a new account21 Printer Customisation Setting Screen Hhmmss System SettingAdvanced Setup Server AuthenticationSystem System Define the HS960 System configurationNAT 2 WAN/LAN 26 WAN/LAN Setting ScreenWAN MAC Address Device IP LAN IP SettingIP Address This identifies the internal LAN IP address of your HS960WAN Port Mode Dhcp ClientStatic IP Keep alive and Redial Period Disable Default Description Service Name EmptyUser Name Empty To 64 alphanumeric characters and is case sensitiveMy IP Address Empty Default Description Password EmptyServer 35 Server Setting ScreenTimeout Administrator Idle MinutesAdministrator will logout automatically Internet Service Provider36 Authentication Setting Screen AuthenticationWificom 38 Authentication Setting Screen Radius AuthenticationChap Billing 39 Billing Setting ScreenEnable Credit Card Service Disable DefaultFor one day of service Tax Percentage DisableAccumulation Enter the number. The field maximum value isAccounting 44 Accounting Setting ScreenExpiration Un-used account Hours MonthsPrint Clicking in the list box Button A~C Three-Button Printer/ Web-based Account Generator Panel49 PC-connected Printer Printout Time to Finish Button B is pressed seven times 7 x $2.00= $14.00 Multiple Button entries53 Example Below is an example of the account printout55 Example Amount 2 x $2.00 + 4 x$ 1.50+1x$1= $11.00Discount Price Plan based on Button Presses 57 Discount Price Plan Setting ScreenVisa Credit Card59 Login Select Service and enter payment information61 User Account Information Customization 62 Standard Login Page Customization Setting ScreenFfffff 64 Redirect Login Page Setting Screen Article Text Color 000000 Article EmptyArticle Background None ColorFrame 68 Frame Login Page Setting Screen70 Logo Setting Screen 71 Example-Login Page Screen Billing Type=Accumulation Billing Type=Time to Finish77 Account Printout Customisation Setting Screen 78 PC-connected Printer Printout 80 Credit Customization Setting Screen 82 Service Selection Page Setting Screen Secure Pay Successful 84 Successful Page Setting Screen86 Fail Page Setting Screen 87 User Agreement Page Setting Screen Pass Through 89 Pass through Setting ScreenDisplay when a FilteringWebsite is blocked System Share Interface Wired Select the interfaceEmpty Enter the IP address of device in the format Use this format such like0050BA8D2296Portal Click Apply button to save the new settingsFrequency AdvertisementRange is 1 to 60 minutes Sequence RandomlyThese 10 sites will display on the front log in screen Walled Garden97 Ddns Setting Screen Ddns Dynamic Domain Name ServiceYY/MM/DD TCP LAN DevicesSyslog 99 Syslog Setting ScreenNeeds to check my Specified syslog serverEmail Address Empty Email Address 1/Email AddressLog Categories 100 Log Settings ScreenSystem Boot Notice Syslog System DisableIf device is rebooted, log would be sent Reboot Format Id, MAC Address System Up System ManagerSubscriber Trace Relationship Information, Units, Usage time, Bill, Payment LAN Devices AlarmBilling profile name Name Payment Cash Credit CardFile every~ minutes Range is 5 to 1440 minutes Session Trace128Kbps Specify the amount of downstream bandwidth BandwidthSecure Remote 103 Secure Remote Setting ScreenSnmp SnmpANY 105 Wireless Setting Screen WirelessHEX Beacon Interval 200 Secure than open authenticationBeacon RTS Threshold 2347Account Generator 106 Account Generator Printer Setting Screen108 System Status Item Screen System Status103 104 Account List Account LogAccount log shows the accounts’ log information Current User Dhcp ClientsDhcp client table shows the current Dhcp users on the LAN 117 Session List Screen Session List119 System Tools Item System ToolsTo factory defaults Erase all setting and back to factory settingSettings but still reserve the subscriber profiles Path fieldBoot Code Firmware UpgradeUse the System Account screen to change the system accounts System Account112 113 114 Ping Command SSL CertificateIP or URL Enter the IP address or the URL link Logout Restart100Mbps Use EIA/TIA-568-100-Category 5 cable RJ-45 Ethernet PortFCC Regulatory Statement Part 15-Class B compliant device This device may not cause harmful interference,Customer Information Appendix C Legal & Regulatory InformationLimitations of Warranty Product WarrantyEmail support@netcomm.com.au Contact Information

HS960 specifications

The NetComm HS960 is a powerful and versatile device designed to meet the demands of modern internet connectivity, making it an excellent choice for both residential and small business environments. This high-performance router emphasizes reliability and speed, catering to users who require seamless online experiences for various applications, be it streaming, gaming, or telecommuting.

One of the standout features of the HS960 is its dual-band Wi-Fi technology, which supports both 2.4 GHz and 5 GHz frequencies. This capability allows users to enjoy high-speed internet connections while reducing interference from other devices. The 5 GHz band, in particular, provides faster data rates for bandwidth-intensive tasks, ensuring smooth streaming and lag-free gaming.

Another significant aspect of the HS960 is its multiple Gigabit Ethernet ports. These ports enable wired connections with speeds up to 1000 Mbps, perfect for devices such as gaming consoles, desktop computers, and network-attached storage systems. The availability of multiple ports enhances flexibility and provides stable connectivity for users with numerous devices.

The HS960 also incorporates advanced security features to safeguard users' information and devices. With support for WPA3 encryption, it offers robust protection against unauthorized access and data breaches. Additionally, the router supports guest network capabilities, allowing visitors to access the internet without compromising the primary network's security.

Moreover, the HS960 is compatible with various Internet of Things (IoT) devices, enabling seamless integration into smart home environments. Users can control connected devices, such as smart lights, thermostats, and security cameras, with ease.

Another notable feature is the user-friendly interface for easy setup and management. The accompanying mobile app provides remote access, allowing users to monitor their network, manage device priorities, and configure advanced settings with just a few taps on their smartphones.

Lastly, the HS960 is built with energy efficiency in mind, complying with contemporary environmental standards, making it a sustainable choice for eco-conscious consumers. With its blend of advanced technologies, security features, and user-friendly design, the NetComm HS960 stands as a strong contender in the competitive router market, fulfilling the connectivity needs of today's digital lifestyle.
Top Page Image Contents