NetComm HS960 manual Snmp, Any

Page 97

3-2-22 SNMP

The SNMP Agent Configuration screen enables you to access to your device via Simple Network Management Protocol. You must first enable SNMP on the SNMP Agent Configuration screen.

Figure 3-104 SNMP Setting Screen

Item

Default

Description

SNMP

Disable

Disables or enables the SNMP management.

 

 

 

SNMP Port

161

If the SNMP enables, also allowed to specific the SNMP port number via NAT.

 

 

The allowed SNMP port numbers are 161 (default), 16100-16199 and Trap

Trap Port

162

port numbers are 162 (default), 16200-16299. This Port setting is useful for

 

 

 

 

remote control via NAT network.

 

 

 

Configuration

 

 

Community Name

public/private

Every unit with SNMP enable must be configured to recognize one or more

 

 

community names up to 20 characters. The default setting for the community

 

 

of entry 1 is “public” and for the entry 2 is “private” and others are empty.

 

 

 

NMS Address

ANY

The address of the NMS. The default settings for the NMS Networking are

 

 

“ANY”.

 

 

 

Privileges

Read/Write

Choose “Read”, “Write”, “Trap Recipients” and “All” for different privileges. The

 

 

default setting of the entry 2 is “write” and others are “read”.

 

 

 

Status

Valid/Invalid

Chosen “Valid” or “Invalid”. The default setting of entry 1, 2 are valid and others

 

 

are invalid.

 

 

 

YML857 Rev1

HS960 Wireless Gateway User Guide

www.netcomm.com.au

97

Page 96 Page 98
Image 97
Page 96 Page 98
Contents User Guide HS960 Wireless Gateway User Guide Contents 101 Pass Through AccountingAdvertisements FilteringPackage Contents Precautions FeaturesTop Panel LEDs Indication Overview of the HS960 Wireless GatewayRear panel of the HS960 is shown below LAN Rear PanelConnection Diagram Hardware Specifications Technical SpecificationsNTP Network Time Protocol Support Software SpecificationsYML857 Rev1 Wall-Mounting InstallationInstallation Requirements Connecting the AntennasSystem Requirements ISP Requirements Dynamic IP settings for the PCYour PC Requirements HS960 Connection Getting StartedPOE Connection POE Power over Ethernet ApplicationConfiguration Set Up WizardStartup Wizard set up screen Internet Connection Setting Screen Internet Connection SettingsProvided by your ISP Default DescriptionPPPoE Point-to-Point Protocol over Ethernet Pptp Client Point-to-Point Tunneling Protocol Internet Connection Setting Screen-PPTP Client SettingTCP MSS Setting 1400 PPP MTU Setting 1460Connection ID/Name Empty Wireless Wireless SettingChannel Enter the channel ID for wireless connection EssidEmail Server’s IP Empty Mail Server SettingAddress or Domain Name Exceed 50 characters Smtp PortYes Authentication Service SettingsBilling Profile Settings 13 Printer Setting Screen Account Generator Printer SettingThree-buttons Printer Setting Accounting SettingPassword Account Web-based Account Generator SettingConfirm Empty Enter the password for confirmation 18 Account Generator Panel Click on button to create a new account21 Printer Customisation Setting Screen Hhmmss System SettingServer Authentication Advanced SetupSystem System Define the HS960 System configurationNAT 2 WAN/LAN 26 WAN/LAN Setting ScreenWAN MAC Address Device IP LAN IP SettingIP Address This identifies the internal LAN IP address of your HS960Dhcp Client WAN Port ModeStatic IP Keep alive and Redial Period Disable Default Description Service Name EmptyUser Name Empty To 64 alphanumeric characters and is case sensitiveMy IP Address Empty Default Description Password EmptyServer 35 Server Setting ScreenTimeout Administrator Idle MinutesAdministrator will logout automatically Internet Service Provider36 Authentication Setting Screen AuthenticationWificom 38 Authentication Setting Screen Radius AuthenticationChap Billing 39 Billing Setting ScreenEnable Credit Card Service Disable DefaultFor one day of service Tax Percentage DisableAccumulation Enter the number. The field maximum value isAccounting 44 Accounting Setting ScreenMonths Expiration Un-used account HoursPrint Clicking in the list box Button A~C Three-Button Printer/ Web-based Account Generator Panel49 PC-connected Printer Printout Time to Finish Button B is pressed seven times 7 x $2.00= $14.00 Multiple Button entries53 Example Below is an example of the account printout55 Example Amount 2 x $2.00 + 4 x$ 1.50+1x$1= $11.00Discount Price Plan based on Button Presses 57 Discount Price Plan Setting ScreenVisa Credit Card59 Login Select Service and enter payment information61 User Account Information Customization 62 Standard Login Page Customization Setting ScreenFfffff 64 Redirect Login Page Setting Screen Article Text Color 000000 Article EmptyArticle Background None ColorFrame 68 Frame Login Page Setting Screen70 Logo Setting Screen 71 Example-Login Page Screen Billing Type=Accumulation Billing Type=Time to Finish77 Account Printout Customisation Setting Screen 78 PC-connected Printer Printout 80 Credit Customization Setting Screen 82 Service Selection Page Setting Screen Secure Pay Successful 84 Successful Page Setting Screen86 Fail Page Setting Screen 87 User Agreement Page Setting Screen Pass Through 89 Pass through Setting ScreenFiltering Display when aWebsite is blocked System Share Interface Wired Select the interfaceEmpty Enter the IP address of device in the format Use this format such like0050BA8D2296Portal Click Apply button to save the new settingsFrequency AdvertisementRange is 1 to 60 minutes Sequence RandomlyThese 10 sites will display on the front log in screen Walled Garden97 Ddns Setting Screen Ddns Dynamic Domain Name ServiceYY/MM/DD TCP LAN DevicesSyslog 99 Syslog Setting ScreenNeeds to check my Specified syslog serverEmail Address Empty Email Address 1/Email AddressLog Categories 100 Log Settings ScreenSystem Boot Notice Syslog System DisableIf device is rebooted, log would be sent Reboot Format Id, MAC Address System Up System ManagerSubscriber Trace Relationship Information, Units, Usage time, Bill, Payment LAN Devices AlarmBilling profile name Name Payment Cash Credit CardFile every~ minutes Range is 5 to 1440 minutes Session Trace128Kbps Specify the amount of downstream bandwidth BandwidthSecure Remote 103 Secure Remote Setting ScreenSnmp SnmpANY 105 Wireless Setting Screen WirelessHEX Beacon Interval 200 Secure than open authenticationBeacon RTS Threshold 2347Account Generator 106 Account Generator Printer Setting Screen108 System Status Item Screen System Status103 104 Account Log Account ListAccount log shows the accounts’ log information Dhcp Clients Current UserDhcp client table shows the current Dhcp users on the LAN 117 Session List Screen Session List119 System Tools Item System ToolsTo factory defaults Erase all setting and back to factory settingSettings but still reserve the subscriber profiles Path fieldBoot Code Firmware UpgradeUse the System Account screen to change the system accounts System Account112 113 114 SSL Certificate Ping CommandIP or URL Enter the IP address or the URL link Logout Restart100Mbps Use EIA/TIA-568-100-Category 5 cable RJ-45 Ethernet PortFCC Regulatory Statement Part 15-Class B compliant device This device may not cause harmful interference,Customer Information Appendix C Legal & Regulatory InformationLimitations of Warranty Product WarrantyEmail support@netcomm.com.au Contact Information

HS960 specifications

The NetComm HS960 is a powerful and versatile device designed to meet the demands of modern internet connectivity, making it an excellent choice for both residential and small business environments. This high-performance router emphasizes reliability and speed, catering to users who require seamless online experiences for various applications, be it streaming, gaming, or telecommuting.

One of the standout features of the HS960 is its dual-band Wi-Fi technology, which supports both 2.4 GHz and 5 GHz frequencies. This capability allows users to enjoy high-speed internet connections while reducing interference from other devices. The 5 GHz band, in particular, provides faster data rates for bandwidth-intensive tasks, ensuring smooth streaming and lag-free gaming.

Another significant aspect of the HS960 is its multiple Gigabit Ethernet ports. These ports enable wired connections with speeds up to 1000 Mbps, perfect for devices such as gaming consoles, desktop computers, and network-attached storage systems. The availability of multiple ports enhances flexibility and provides stable connectivity for users with numerous devices.

The HS960 also incorporates advanced security features to safeguard users' information and devices. With support for WPA3 encryption, it offers robust protection against unauthorized access and data breaches. Additionally, the router supports guest network capabilities, allowing visitors to access the internet without compromising the primary network's security.

Moreover, the HS960 is compatible with various Internet of Things (IoT) devices, enabling seamless integration into smart home environments. Users can control connected devices, such as smart lights, thermostats, and security cameras, with ease.

Another notable feature is the user-friendly interface for easy setup and management. The accompanying mobile app provides remote access, allowing users to monitor their network, manage device priorities, and configure advanced settings with just a few taps on their smartphones.

Lastly, the HS960 is built with energy efficiency in mind, complying with contemporary environmental standards, making it a sustainable choice for eco-conscious consumers. With its blend of advanced technologies, security features, and user-friendly design, the NetComm HS960 stands as a strong contender in the competitive router market, fulfilling the connectivity needs of today's digital lifestyle.
Top Page Image Contents