Niles Audio 8 manual Volt Sync, Syncing the TV

Page 18

and to the MSU’s composite video sync port which corresponds to that source’s Master Key.

Note: The labeling of the Master Keys on the Tabletop Remote must match the sync connections on the MSU. (For example, if the VCR is Master Key #4, one side of the VCR’s split video output must be connected to video sync port #4).

The IntelliControl’s video sync ports have an input impedance of 10,000 ohms. This high impedance circuit assures that even with the use of a “Y” or splitter connection, the signal sent to the television (or Preamp) is absolutely unaffected. Typically, a “Y” connector and an additional video cable are needed for video sync. If the component has more than one video output, only a cable is needed.

Syncing the TV

Televisions which have multiple inputs present a sync problem. Some TV’s do not output a video signal from the Monitor Video output when there is no signal coming into the selected input. Thus, the IntelliControl will be deceived into thinking that the TV is off, when it is on. Although a TV’s monitor output will not provide reliable sync, there are four options:

1.Use the TV’s “Tuner Output” if available. This will ensure that the Sync is reliable.

2.Specify a Niles APC-2 current sensing device to detect the flow of current to the TV when it is on. Note: This is the only reliable way to sync a Plasma TV (assuming it does not feature separate “On” and “Off” codes).

3.Use a Niles LS-1 Light Sensor. (See “12V Sync” options below)

4.Use a TV with separate “On” and “Off” commands.

Note: The TV’s sync signal output (video or 12V) must be connected to the dedicated “TV Sync” port on the IntelliControl MSU.

12 Volt Sync

The IntelliControl Main System Unit has 12V Sync connections for the system’s preamp/receiver, TV Monitor (or projector), and up to eight source components. The 12V Sync signal lets the IntelliControl know whether the component is on or off and can be supplied by five different methods:

1. 12V DC Sync via a Wall Adapter Plugged into a Switched AC Outlet

Many preamps, integrated amps, receivers, surround-sound processors, and cable TV descramblers have a switched AC outlet (i.e. the outlet is hot when the preamp is “on”, and dead when the preamp is “off”) to automatically power up components with latching power. In an IntelliControl system, the switched outlet may be expanded with an extension cord or power strip to accommodate a 12V DC 200mA wall adapter and any “latching power” components you may be using. The output of the wall adapter is connected to the IntelliControl’s dedicated “Preamp 12V” sync input.

13

Page 17 Page 19
Image 18
Page 17 Page 19
Contents IntelliControl Reference Manual Contents 2C. Component Compatibility 3I. Utilities Specifications 1A. IntelliControl Features and Benefits Complete SystemAutomatically Unmute the System Manage and Automate Unfriendly ComponentsPC Programmable with IntelliFile 1B. IntelliControl Parts Guide Proudly Made in USATabletop Remote Main System Unit MSU Main System Unit Top ViewPage IntelliControl Solution Syncronization Sync Solving The Problems of Conventional Home Theater OperationProblem One Turning the System On 1C. Selling the SystemSystem Schematic Problem Two Selecting Inputs & Modes Problem Five The Pitfalls of Mute IntelliControl Solution Software Managers to Manage MuteProblem Six Infrared Remote Controls Are Line-Of-Sight Only 1D. Comparison of Home Theater Control Systems System Comparison2A. Power Syncronization Components that Don’t Need Sync Those with Latching PowerInfrared Turn On/Off Requires Sync 2B. Sync Methods and Options Video SyncVolt Sync Syncing the TVNiles LS-1 Light Sensor Niles APC-2 Current Sensing SwitcherNiles IPC-6 Current Sensing AC Power Controller Niles OTI-512 Voltage SensorMaster Key Sync Features 2C. Component Compatibility Infrared CompatibilityOnce Again Remember the Exception Testing Components for Automation Conflicts Testing Components for Sync MethodSync Off Delay Testing the Switched AC OutletTesting the Video Output of a Source Testing Current Sensing Testing the Video Output of a TelevisionTesting Light Sensing Testing a Component’s Control Voltage OutputPage Programming Capabilities 3A. Pages, Keys, and SequencesAn Address For Every IR Command Issue a Sequence From a Function KeyPurpose of the Default Purpose of the Master Key Pages3B. Function Key Memory Limitations Purpose of the Library Pages3C. Master Key Automation Part 1 One Touch System Turn On Sync Snapshot Event One Initial SequenceEvent Seven Surround Mode Event Two TV PowerEvent Three Preamp Power Event Five TV Input3E. Master Keys Part 2 Special Features Automation Bypass for Manually Adjusted FeaturesAutomation Bypass for a Typical Application Installation Trick Programming TrickPress and Hold a Master Key Testing the Anchor Command Testing Direct IRFinding the Secret Back-Door Anchor Command 3F. Master Keys Part 3 Direct IR, Sequence IR, and Managers3G. Master Keys Part 4 Intelligent System Turn Off Testing the Input Manager MethodDetermine the Defaults Event 1 System Off Initial SequenceEvent 4 Preamp Auto Turn Off Event 3 Auto Volume ResetEvent 2 TV Auto Turn Off Event 5 Component Auto Turn OffVideo 12V Output and Relay 3I. UtilitiesAudio 12V Output Assignable 12V Output and RelayVolume Reset IR RoutingDual TV Mute Manager Memory UsageIntegrating the IntelliControl with IR Repeater Systems Integrating a Second ZoneTurning On Common Sources in Multi-Zone Systems Multiple TV Array In a Media Room Integrating the Niles IntelliPad Into the Home TheaterPage Connect and Power Up the MSU, Your PC, and the IntelliFile Step-by-Step Installation of a New SystemConnect, Power Up, and Test The Home Theater Check MSU Location for Freedom from InterferenceTesting and Troubleshooting RF Transmission and Reception Construct an AntennaConnect Flashers and Sync Cables Flasher Level Check Labeling CablesAdjusting Flasher Levels IR/RF Test LEDSpecifications IntelliControl Tabletop RemoteIntelliControl Main System Unit

8 specifications

The Niles Audio 8 represents a significant advancement in the world of home audio, combining superior sound quality with innovative technology tailored for both audiophiles and casual listeners. This in-wall speaker is designed to provide an immersive listening experience while seamlessly integrating into modern home environments.

One of the standout features of the Niles Audio 8 is its exceptional sound clarity and depth. The speaker is equipped with an 8-inch polypropylene woofer, which delivers deep, resonant bass, while the 1-inch aluminum dome tweeter ensures crisp and clear highs. This combination allows users to enjoy a wide frequency response, making it suitable for a diverse range of music genres and audio formats.

Another key characteristic of the Niles Audio 8 is its sophisticated installation design. The speaker utilizes a low-profile grille that can be painted to match the surrounding wall, allowing it to blend effortlessly with the home decor. Its easy-to-install mounting system simplifies the process, making it an ideal choice for both professional installers and DIY enthusiasts. The speaker's rear sonic ports are engineered to enhance the bass response, ensuring that the sound fills the room without overwhelming it.

In terms of technology, the Niles Audio 8 employs advanced sound dispersion techniques, allowing it to project sound evenly throughout the space. This ensures that no matter where listeners are seated, they can enjoy uniform sound quality. The inclusion of high-quality crossover components further optimizes audio performance, resulting in a balanced output that highlights both the low and high frequencies without distortion.

Durability is another strong point of the Niles Audio 8. Constructed with robust materials, the speaker is designed to endure the rigors of indoor environments while maintaining its aesthetic appeal. Its weather-resistant features also make it suitable for outdoor installations, allowing homeowners to create a cohesive audio experience throughout their property.

Overall, the Niles Audio 8 stands out in the competitive home audio market due to its blend of advanced engineering, versatile design, and exceptional sound quality. Whether you are setting up a dedicated home theater system or creating a multi-room audio experience, the Niles Audio 8 provides the performance and flexibility to meet your audio needs.
Top Page Image Contents