Net Optics 4xN 10, 4xN1000 manual Deleting a Group, Adding iMatrix Switches, To delete a Group

4xN 10/100/1000 Span iMatrix Switch

Figure 21: Group Bar

2. Type the name of the new group and press Enter.

Deleting a Group

You can delete a group however, all iMatrix Switches in that group will also be deleted from System Manager.

Note:____________________________________________________________________

Deleting an iMatrix Switch from System Manager does not affect the current operating status of the iMatrix Switch. It will continue to pass traffic from the Span Ports connected at the time you delete the iMatrix Switch from System Manager to the Monitor Ports.

__________________________________________________________________________

To delete a Group:

1.Right click on the group bar of the group you want to delete.

2.Select Delete from the pop-up menu. The Group and all associated iMatrix Switches are deleted from System Manager.

Adding iMatrix Switches

To configure and control iMatrix Switches with System Manager, you must add iMatrix Switches to System Manager. Once you have added an iMatrix Switch, you can configure, modify, group, and delete it from System Manager.

Note:____________________________________________________________________

The iMatrix Switch must be connected to the network as described in Chapter 2 before it can be added to System Manager.

__________________________________________________________________________

25