Net Optics 4xN1000, 4xN 10 manual Net Optics System Manager with an iMatrix Switch

Page 31

4xN 10/100/1000 Span iMatrix Switch

Figure 24: Net Optics System Manager with an iMatrix Switch

The indicator to the right of the iMatrix Switch picture blinks green when the iMatrix Switch is functioning normally. If there is an alarm condition on the iMatrix Switch, the indicator blinks red. If System Manager cannot communi- cate with the iMatrix Switch, the graphic of the switch appears grayed. Check that the iMatrix Switch is connected to the network and verify the conﬁguration information.

7. Repeat Steps 1-6 for each iMatrix Switch you are adding to System Manager.

Tip! _____________________________________________________________________

To change the order in which iMatrix Switches appear in the System Frame, click and drag iMatrix Switches into the desired order.

__________________________________________________________________________

27

Image 31

Contents User Guide for 4xN 10/100/1000 Span iMatrix Switch Trademarks and Copyrights Contents Appendix B Command Line Interface Chapter Using System ManagerAppendix a Speciﬁcations and Models Scalable Deployment Remote ControlReliability Support Key FeaturesPassive, Secure Technology Ease of UseAbout this Guide Unpacking and InspectionLED Indicators Product DiagramsRemote Access Installation PlanningSingle iMatrix Switch Mode Daisy Chaining ModeUsing the Command Line Interface CLI Conﬁguring the iMatrix SwitchTo access the iMatrix Switch CLI Set username username To change the username and passwordTo disable the remote interfaces Set password passwordTo set the iMatrix Switch IP address To display current settingsIMatrix Switch CLI Help Menu To use the Help commandConnecting to the Monitoring Device Connecting to Switch Span Ports3 4 5 6 7 Connecting Monitor Ports Connecting the Remote Interface PortTo daisy chain iMatrix Switches Daisy Chaining iMatrix SwitchesConnecting Daisy Chained Monitor Ports Connecting the Daisy Chain Control Ports To access Web Manager Accessing Web ManagerField Name Value Description Viewing Switch StatusField Name Function/Value Description Switch ControlMessage Board To install System Manger Installing System ManagerWelcome Dialog Box Conﬁrm Installation Installation Progress Exploring System Manager To access System ManagerTip Using the ToolbarTo create an iMatrix Switch group Creating a GroupDeleting a Group Adding iMatrix SwitchesTo delete a Group Adding a New iMatrix Switch To add an iMatrix Switch to the systemNet Optics System Manager with an iMatrix Switch To conﬁgure the iMatrix Switch Deleting an iMatrix SwitchConﬁguring an iMatrix Switch To delete an iMatrix Switch from System ManagerTo view iMatrix Switch information Viewing iMatrix Switch InformationFollowing table explains the status ﬁelds To modify the iMatrix Switch conﬁguration Modifying an iMatrix SwitchTo connect a Monitor Port to a Span Port Controlling Switch ConnectionsConnecting Monitor Port To enter Span Port Names and Notes Entering Port Names and NotesEnvironmental ElectricalMechanical IMatrix System Manager Command Line InterfaceSoftware IMatrix Web ManagerAppendix B Command Line Interface 4xN 10/100/1000 Span iMatrix Switch 4xN 10/100/1000 Span iMatrix Switch By Net Optics, Inc. All Rights Reserved