Nvidia 780I SLI manual None, Auto, Manual, Large

Configuring the BIOS

Press Enter to auto-detect IDE and SATA channels in the system. Once the channel is detected, the values for Capacity, Cylinder, Heads, Precomp, Landing Zone, and Sector are automatically filled in.

qNone

There is no HDD installed or set.

qAuto

The system can auto-detect the hard disk when booting up.

qManual

When you set the channel to [Manual] and change Access Mode to [CHS], you can then enter the number of cylinders, heads, Precomp, landing zone, and sector. You can manually enter the values or you can press Enter to display a window that tells you the min and max values.

IDE	HDD Auto-Detect		[Press Enter]
IDE	Channel	0 Slave	[Manual}
Access Mode			[CHS]

Capacity		0 MB	Press ENTER to display sub-
Cylinder			menu
	.....0
			or enter number manually
Head	[	0]
Precomp	[	0]	Cylinder
Landing Zone	[	0]
Sector	[	0]
			Min=	0
The BIOS supports the following HDD			Max=65535
Access Modes:
			Key in a DEC number :

ØCHS

For HDD less than 528 MB.

ØLBA

For HDD greater than 528 MB and	#$:Move ENTER:Accept ESC:Abort
supporting LBA (Logical Block
Addressing).

ØLarge

For HDD greater than 528 MB but not supporting LBA.

ØAuto

Recommended mode.

NVIDIA Corporation

October 17, 2007 DU-03597-001_v01

33