Nvidia 780I SLI manual Init Display First, Reset Configuration Data, Resources Controlled By

780i 3-Way SLI Motherboard

Init Display First

This function on the PnP/PCI Configuration menu allows you to define if the initial display is in the PCI slot or in the PCI Express slot. Options are [PCI Slot] and [PCIEx].

Reset Configuration Data

This function on the PnP/PCI Configuration menu allows you to enable or disable the resetting of Extended System Configuration Data (ESCD) when you exit Setup. Set this to [Enabled] if you have installed a new add-on and the system reconfiguration has caused a serious conflict that prevents the OS from booting. The default setting is [Disabled].

Resources Controlled By

62

This function on the PnP/PCI Configuration menu allows you to define if the BIOS can automatically configure all the boot and plug-and-play compatible devices or if you can manually select IRQ, DMA, and memory base address fields. Select [Auto(ESCD)] if you want the BIOS to automatically populate these fields. If you select [Manual] so you can assign the resources, IRQ Resources is enabled for input.

Resources Controlled By		[			]
			Auto(ESCD)
x IRQ Resources		Press Enter
Resources Controlled By		[		)]
			Manual
IRQ Resources	[Press Enter]

NVIDIA Corporation

October 17, 2007 DU-03597-001_v01