Minicom Advanced Systems Phantom manual Hotkey functions, Selecting a Computer, Press Shift, Shift

The hotkey functions

Selecting a Computer

To select a computer:

1.Navigate to the desired computer with the Up and Down Arrow keys.

Or

Type the computer number. It will appear in the “SELECT COMPUTER” line. See Figure 2-1.

2.Press Enter. The selected computer’s screen replaces the Manager’s screen. A Confirmation label appears showing which computer is accessed. See Figure 2-2. Control and monitor the computer from the Manager KVM position.

Figure 2-2 The Confirmation label

To return to the OSD:

Press Shift, Shift.

To return to the Manager computer screen:

Press Shift, Esc.

To return to the previously accessed computer screen:

Press Shift, Tab.

The hotkey functions

The OSD hotkey functions are briefly outlined in the table below.

Hotkey	Function
F1	Move label identifying the current selected computer to anywhere on the screen
F2	Opens Edit window to edit text – change computer names etc.
F3	Opens Setup window to set parameters – scan times etc.
F4	Activate scan
F5	Image tuning
F6	Autoskip – during a scan skip inactive computers
F7	Opens Password window to activate password protection – explained in chapter 3
F8	Keyboard language
F9	Change the display hotkey
F10	Firmware upgrade/ Numbering software access mode – explained in chapters 5&6
F11	Load defaults – explained in chapter 4
F12	Auto-numbering – explained in chapter 3

2-2