Minicom Advanced Systems Phantom manual SCN Scan column, DSP Display column, Column Function

The OSD functions

Column	Function
Numbers	Computer numbers in groups of 8
SCN	Scanning time period
DSP	Confirmation label display time
KB	Keyboard setting, either PS or Unix
MS	Mouse type
OUT	Security Timeout period (Explained in chapter 3)
1-6	Security profiles (Explained in chapter 3)

The SCN (Scan) column

The SCN column shows the length of time in seconds that a remote computer’s screen will appear on the Management screen during scanning.

The DSP (Display) column

The DSP column shows the length of time in seconds that the remote computer’s Confirmation label appears on the Management screen.

Changing the SCN and DSP time spans

The SCN and DSP time spans are preset to 030 seconds. You can adjust these times to suit your needs.

To change the time span:

1.Navigate with the Tab or Right and Left Arrow keys to the time span you want to change.

2.Type the desired time span using the numbers above the keyboard letters.

3.Press Esc.

When typing over a group of three digits, the cursor automatically reverts to the first digit once you edit the third digit.

Changing the time span of a group of computers

You can change the time spans of the SCN and DSP columns from a particular computer downwards.

To change the time span:

1.Navigate to the time span of the first computer you wish to change.

2.Type the desired change.

3.Press End, End. The remainder of the column takes on the same change.

4.Press Esc.

2-5