Minicom Advanced Systems RJ-45 Connecting the Power management option, Connecting to Ethernet

Page 10

SMART IP LINK

10.Connecting the Power management option

Figure 6 gives an overview of the Power management option.

www.minicom.com		USER	COMPUTER
		RST
	POWER
	100-250 VAC 50/60 Hz	ETHERNET
	SERIAL	ETHERNET

Serial

Mains

External power Switch -

IPM 220-L Inline Power module, or 3rd party unit

	Server
Keybd	Mouse
	100T
Serial A	Parallel
Video
Serial B

KVM

Figure 6 Power management option

11. Connecting to Ethernet

The Ethernet connector on the IP Link can be used either for a 100 Mbps 100BASE- TX connection or for a 10 Mbps 10BASE-T connection. The Ethernet adapter adjusts to the appropriate operation mode automatically.

12. 10 Mbps Connection

For 10BASE-T Ethernet networks, the Fast Ethernet adapter uses Category 3, 4, or 5 UTP/FTP cable. To establish a 10 Mbps connection, the cable must be connected to

a10BASE-T hub. Ensure the cable is wired appropriately for a standard 10BASE-T adapter. Align the RJ-45 plug with the notch on the adapter's connector and insert it into the adapter's connector.

9

Image 10

Contents

Smart IP Link User Guide Welcome Table of Contents Smart IP Link Features of IP Link Introduction System components Remote power management IP Link cables IP Link front panel IP Link rear panel portsReset button Pre-installation instructionsConnecting the IP Link to the host computer/KVM switch Serial portIP Link connections to a computer Connecting to Ethernet Connecting the Power management optionMbps Connection Configuring the system Switching onConfiguring system via Dhcp server Configuring system via local console Connect To boxIP Link Video Modes Operating the IP Link systemLogin screen LoggingTimeout Server Power StatusRemote Console Keyboard layout Toolbar buttons and iconsVideo settings Options menuVideo settings Mouse synchronizationSingle mouse mode Synchronizing the client and host miceRemote Console Settings SSL settingsSSL Certificate Management CSRRemote Console Type Mouse SettingsDirect 1n mouse mode Automatic speed detectionMouse hotkey Remote Console Button KeysNetwork Settings IP auto configurationGateway IP address IP addressSubnet mask Primary DNS Server IP addressDynamic DNS Bandwidth limitSerial Settings Dynamic DNS SettingsPassthrough access to serial port via Telnet Serial Port windowModem Telnet ConsoleIPM 220-L Inline Power Modul Configuration loginTelnet server commands Account User settingsPassword User nameMaintenance features MaintenanceBoard Summary User Guide Frequently Asked Questions Glossary of terms Appendix a IP Link Video modes Appendix B Key codes Escape ESC RJ 45 Connector Ethernet Appendix C Pin assignmentsSerial SUB-D 9 Connector Appendix D Technical specifications Smart IP Link User Guide