Multi-Tech Systems MTASR1-100 manual Specifications, Ethernet Port, Command Port, WAN Link

Page 11

Chapter 1 - Introduction and Description

Specifications

The RouteFinder conforms to the following specifications.

•Routing Protocols - IP and IPX and bridging for all others

•Ethernet LAN Interface - 10Base-T (twisted pair) or 10Base2 (ThinNet) BNC

•WAN Interface - 1 async or sync link (RS-232C/V.35)

•Command Port - 19.2 Kbps Asynchronous

•Two 4-megabyte DRAMs (1 meg by 36 bytes at 70 nanosecond SIMMs)

Caution: SIMM speed and size cannot be mixed.

•1 MB of Flash memory

Ethernet Port

•One Ethernet Interface - 10Base-T (twisted pair) RJ-45 connector or 10Base2 (ThinNet) BNC connector.

Command Port

•Single 19.2 Kbps asynchronous Command Port using a short RJ-45 to DB25 cable with a female connector.

WAN Link

•115.2 Kbps asynchronous WAN link or T1 (1.544 Mbps) sync link using DB25 male connector. Optional ITU-T V.35 interface using a V.35 adapter cable.

Electrical/Physical

•Voltage - 115 VAC (Standard), 240 Volts AC (Optional)

•Frequency - 47 to 63 Hz

•Power Consumption - 10 Watts

•Dimensions - 1.625" high x 6" wide x 9" deep

0.63cm high x 2.34 cm wide x 3.51 cm deep

•Weight - 2 pounds (.92 kg)

MTASR1-100

11

Image 11

Contents User Guide Patents User GuideRecord of Revisions Revision DescriptionContents Glossary of Terms Index Introduction and Description Preview of this Guide IntroductionIntroduction and Description Remote Configuration and ManagementService, Warranty and Tech Support Related DocumentationWAN Link Front PanelBack Panel Shunt Positions ShuntsWAN Link SpecificationsCommand Port Ethernet PortMTASR1-100 Installation Unpacking UnpackingChanging Shunt Position InstallationBack Panel Connections Cabling your RouteFinderSoftware Loading and Configuration Loading your Software Do you want to download default setup? dialog is displayed Software Loading and ConfigurationNovell IPX Protocol Default Setup dialog box is displayed Software Loading and Configuration RouteFinder MTASR1-100 User Guide Setting Up Your Remote User Database Call Back User PasswordCall Back Security Enabled Call Back DelayRouteFinder Software Before You Begin Download Default SetupDownload Firmware Configuration Port SetupWAN Device Configuration UninstallIP Port Setup Router ConfigurationRouteFinder Software MTASR1-100 Open Shortest Path First Ospf IPX Setup RouteFinder Software Spanning Tree Setup WAN Port Setup Point-to-Point Setup Frame Relay Setup Frame Relay Dlci Diagnostics Applications SetupScripting Remote Configuration and Management Modem-Based Remote Configuration Procedure Remote Configuration and Management Windows Sockets Compliant TCP/IP Stack LAN-Based Remote ConfigurationRemote Configuration and Management Telnet Remote ManagementRouter Management WEB Browser Management Service, Warranty and Tech Support On-line Warranty Registration Limited WarrantyRecording RouteFinder Information Service, Warranty and Tech SupportTech Support Service If you know the file name Multi-Tech BBSTo log on to the Multi-Tech BBS To Download a fileAbout the Internet About the Multi-Tech Fax-Back ServiceAppendixes 10BASE-T RJ-45 10BASE 2 BNC LAN CablesLink Cable WAN CablesAppendixes RS232C/V.24 * Link CableScript Language Grammar Appendix B Script LanguageOperator Precedence Two basic types of variables are supportedThere are two types of conditional constructs There are two types of iterative constructsExample Script Industry Canada EMC and Safety Directive ComplianceAppendix C Regulatory Information Class a Statement FCC PartTCP/IP Appendix D TCP/IPAppendixes Internet Protocol IP Glossary of Terms MTASR1-100 Glossary MTASR1-100 Glossary MTASR1-100 Glossary MTASR1-100 Glossary MTASR1-100 Glossary Subscriber Loop See Local loop Glossary MTASR1-100 Index IndexSoftware