Multi-Tech Systems RJ-45, RJ-9 manual Time Zone Configuration, Daylight Configuration

Page 27

Chapter 3 – Using the Web Management Software

IP Setup > SNTP Configuration

General Configuration

SNTP Client: Enable or disable the SNTP Client to contact the configured server on the UDP port 123 and set the local time. The default is Disable.

Server: Enter the SNTP server name or IP address to which the SNTP Client must contact in order to update the time. No default.

Polling Time: Enter the polling time at which the SNTP client requests the server to update the time. Default is 300 minutes. Time must be entered in minutes.

Time Zone Configuration

Time Zone: Enter your time zone. Default = UTC (Universal Coordination). See the following Web site for Time Zone information: http://wwp.greenwichmeantime.com/info/timezone.htm

Time Zone Offset: Enter +/- hh:mm. Default = +00:00. Offset is the amount of time varying from the standard time of a Time Zone.

Daylight Configuration

Daylight Saving: Enables/disables Daylight Saving mode. The default is Enable.

Daylight Saving Offset: Set the offset to use during Daylight Saving mode. Default is +60 minutes. Enter the time in + / - minutes.

Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375B)

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents MultiModem→ Trademarks User GuideCopyright Record of Revisions Revision Date DescriptionTable of Contents Tools Packet FiltersGRE Tunnels Dhcp ServerProduct and Interface Descriptions Introduction Product DescriptionApplication Example Ship Kit Contents Vehicle Safety Safety WarningsHandling Precautions Safety Instructions for Hazardous LocationsSpecifications AT Command InformationFeatures Edge Modems Gprs Modems Cdma Modems Getting Started Wireless Account Setup IntroductionObtain a Wireless Account Phone Numbers for the Wireless ModemAntenna Connect Antenna, Ethernet, & PowerFront Panel LEDs Ethernet LEDsModem LEDs Next Steps Set Your PC’s TCP/IP Address for Ethernet FunctionalityLogin Important Prerequisite for Activating a Cdma AccountOpen a Web Browser Cdma Activation Steps AT Command Modem Comment ResponseStep AT Command Response Comment Step AT Command ResponseLogout After Entering Activation Commands Signal Strength Rssi Prerequisite SetupOpen the Command Window Verify Signal StrengthChecking Network Registration and Roaming Status Benefits of Using the Wizard Setup Use the Wizard Setup for Quick ConfigurationShutdown Caution Set Time and DateConnecting to the Internet Connecting to the Internet StepsImportant Note About Provider Fees Page Navigating the Web Management Software Using the Web Management SoftwareDhcp Server Tools IP SetupServices Tunnels Logs NetworksWeb Management Software Screens IP SetupSyslog Configuration General ConfigurationIP Configuration Auto Dialout ConfigurationSubmit GeneralDaylight Configuration Time Zone ConfigurationImportant Note Daylight Saving Start TimeDaylight Saving End Time Add Static RoutesRemote Configuration IP Setup Remote ConfigurationIf NAT is disabled PPP PPP ConfigurationNAT Configuration If NAT is enabledModem Configuration PPP GeneralIcmp Keep Alive Check PPP Wakeup-on-Call Wakeup-on-Call ConfigurationCaller ID Configuration Caller Acknowledgement ConfigurationPPP Wakeup-On-Call Examples For Gprs and EDGE, it is *99***1# Set the Time Delay. Use can use the 10 second default Power-On Init String Configuration PPP Power-On ConfigurationNetworks & Services Networks & Services Network ConfigurationNetwork Configuration Service Configuration Networks & Services Service ConfigurationPacket Filters Packet Filters Packet FiltersPacket Filter Packet Filters Dnat Configuration Dnat ConfigurationPacket Filters Dnat Example Example Any Example MeterIPExample Nochange Icmp Configuration Packet Filters AdvancedConnection Tracking GRE Tunnel Configuration GRE TunnelsGRE Tunnels GRE Tunnels GRE Routes Configuration GRE Tunnels GRE Routes ConfigurationDhcp Server Subnet Settings Subnet SettingsDhcp Server Tools Tools Dhcp Fixed ConfigurationTools Dhcp Server Fixed AddressesImportant Notes Tools Service StatusTools Firmware Upgrade Firmware UpgradeTools Load Configuration Tools Save ConfigurationLoad Configuration Statistics & Logs Statistics & Logs EthernetStatistics & Logs Serial Statistics & Logs PPP Statistics & Logs PPP Trace Statistics & Logs SysInfo Statistics & Logs Dhcp StatStatistics & Logs GRE Statistics Appendix a a Reference Table of Commonly Supported Subnets Appendix a Reference Table of Commonly Supported Subnets Antenna Appendix B Wireless AntennaFused DC Power Cable Dimensions How to Change the Fuse Obtaining the Latest Firmware Version Appendix C Firmware Upgrade Using External Tftp ClientMulti-Tech Warranty Statement Multi-Tech Warranty StatementRepair Procedures for International Distributors Replacement PartsWaste Electrical and Electronic Equipment Weee Appendix E Waste Electrical Electronic EquipmentAntenna IndexWakeup on Call Examples

RJ-9, RJ-45 specifications

Multi-Tech Systems offers a range of communication solutions, prominently featuring the RJ-45 and RJ-9 connectors that are crucial in networking and telecommunications. These connectors are foundational to many applications, enabling efficient data transfer and ensuring reliable voice communications.

The RJ-45 connector is primarily used in Ethernet networks. It features eight pins and is designed for high-speed data transmission, making it the standard for wired local area networks (LANs). This connector supports various Ethernet standards including Fast Ethernet (100BASE-T), Gigabit Ethernet (1000BASE-T), and even 10 Gigabit Ethernet (10GBASE-T). An essential characteristic of the RJ-45 is its versatility, as it can be used with both straight-through and crossover cable configurations. This flexibility allows for straightforward connectivity between devices such as computers, routers, and switches.

Multi-Tech Systems employs advanced technology in their RJ-45 connectors, including support for Power over Ethernet (PoE). This innovation permits electrical power and data to be transmitted over the same cable, simplifying installations and reducing the need for additional wiring. The robust design of these connectors ensures durability and minimizes signal interference, thereby maximizing data integrity during transmission.

On the other hand, the RJ-9 connector, also known as the RJ-9 or RJ-10 connector, is typically used in telephone and headset applications. Characterized by its smaller size and four or six pins, the RJ-9 is optimized for voice frequency communication. It connects devices such as telephones, headsets, and other VoIP equipment, delivering clear audio quality that is essential for effective communication.

One standout feature of the RJ-9 connector is its ability to provide superior noise resistance, making it ideal for environments with significant electromagnetic interference. Multi-Tech Systems' RJ-9 connectors are designed for ease of use, allowing quick and simple connections. These connectors can often be found in various telephony devices, ensuring that they remain a staple in personal, commercial, and industrial communication systems.

In conclusion, Multi-Tech Systems continues to lead in the provision of reliable RJ-45 and RJ-9 connectors, integrating innovative technologies that enhance performance in data and voice communication. Whether in a high-speed networking environment or in everyday telephony applications, these connectors deliver the functionality and quality demanded by modern users. Their design and engineering reflect a commitment to excellence, helping users stay connected in an increasingly digital world.
Top Page Image Contents