Multi-Tech Systems RJ-45, RJ-9 manual Networks & Services Network Configuration

Page 37

Chapter 3 – Using the Web Management Software

Networks & Services

Networks & Services > Network Configuration

Networks or Hosts can be added here. The options to Delete or Edit a network after it has been defined and added are available by using the table at the bottom of the screen.

Network Configuration

Enter the Name, IP Address, and Mask for a new Network or Host.

Notes:

•A Network/Host Name cannot be edited.

•A Network/Host cannot be deleted if it is used in another configuration.

•Network/Host changes are reflected in all the configurations in the Web Management software where they are used.

•A Network/Host added here will be displayed in the following sections: Static Routes, DNAT, and Packet Filters.

Name:Enter the name of the Network/Host. The same address-mask pair should not already be present in the displayed list.

IP Address: Enter the IP Address of the Network/Host. The same address-mask pair should not already be present in the displayed list.

Subnet Mask: Enter the Network Mask of the Network/Host. For Host addresses, the mask is entered as 32.

Note: See Appendix A -- Table of Commonly Supported Subnets.

Add Button: Click the Add button. The defined network is added and will display at the bottom of the screen.

Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375B)

37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents MultiModem→ Copyright User GuideRecord of Revisions Revision Date Description TrademarksTable of Contents GRE Tunnels Packet FiltersDhcp Server ToolsProduct and Interface Descriptions Introduction Product DescriptionApplication Example Ship Kit Contents Handling Precautions Safety WarningsSafety Instructions for Hazardous Locations Vehicle SafetyAT Command Information SpecificationsFeatures Edge Modems Gprs Modems Cdma Modems Obtain a Wireless Account Wireless Account Setup IntroductionPhone Numbers for the Wireless Modem Getting StartedAntenna Connect Antenna, Ethernet, & PowerEthernet LEDs Front Panel LEDsModem LEDs Next Steps Set Your PC’s TCP/IP Address for Ethernet FunctionalityImportant Prerequisite for Activating a Cdma Account LoginOpen a Web Browser Step AT Command Response Comment AT Command Modem Comment ResponseStep AT Command Response Cdma Activation StepsLogout After Entering Activation Commands Open the Command Window Prerequisite SetupVerify Signal Strength Signal Strength RssiChecking Network Registration and Roaming Status Benefits of Using the Wizard Setup Use the Wizard Setup for Quick ConfigurationShutdown Caution Set Time and DateConnecting to the Internet Steps Connecting to the InternetImportant Note About Provider Fees Page Navigating the Web Management Software Using the Web Management SoftwareServices Tunnels Logs IP SetupNetworks Dhcp Server ToolsWeb Management Software Screens IP SetupIP Configuration General ConfigurationAuto Dialout Configuration Syslog ConfigurationSubmit GeneralDaylight Configuration Time Zone ConfigurationDaylight Saving End Time Daylight Saving Start TimeAdd Static Routes Important NoteRemote Configuration IP Setup Remote ConfigurationNAT Configuration PPP PPP ConfigurationIf NAT is enabled If NAT is disabledPPP General Modem ConfigurationIcmp Keep Alive Check Caller ID Configuration Wakeup-on-Call ConfigurationCaller Acknowledgement Configuration PPP Wakeup-on-CallPPP Wakeup-On-Call Examples For Gprs and EDGE, it is *99***1# Set the Time Delay. Use can use the 10 second default Power-On Init String Configuration PPP Power-On ConfigurationNetworks & Services Network Configuration Networks & ServicesNetwork Configuration Service Configuration Networks & Services Service ConfigurationPacket Filters Packet Filters Packet FiltersPacket Filter Dnat Configuration Packet Filters Dnat ConfigurationPacket Filters Dnat Example Example MeterIP Example AnyExample Nochange Packet Filters Advanced Icmp ConfigurationConnection Tracking GRE Tunnels GRE Tunnel ConfigurationGRE Tunnels GRE Tunnels GRE Routes Configuration GRE Tunnels GRE Routes ConfigurationSubnet Settings Dhcp Server Subnet SettingsDhcp Server Tools Dhcp Fixed ConfigurationDhcp Server Fixed Addresses Tools ToolsTools Firmware Upgrade Tools Service StatusFirmware Upgrade Important NotesTools Save Configuration Tools Load ConfigurationLoad Configuration Statistics & Logs Ethernet Statistics & LogsStatistics & Logs Serial Statistics & Logs PPP Statistics & Logs PPP Trace Statistics & Logs Dhcp Stat Statistics & Logs SysInfoStatistics & Logs GRE Statistics Appendix a a Reference Table of Commonly Supported Subnets Appendix a Reference Table of Commonly Supported Subnets Antenna Appendix B Wireless AntennaFused DC Power Cable Dimensions How to Change the Fuse Obtaining the Latest Firmware Version Appendix C Firmware Upgrade Using External Tftp ClientMulti-Tech Warranty Statement Multi-Tech Warranty StatementRepair Procedures for International Distributors Replacement PartsWaste Electrical and Electronic Equipment Weee Appendix E Waste Electrical Electronic EquipmentAntenna IndexWakeup on Call Examples

RJ-9, RJ-45 specifications

Multi-Tech Systems offers a range of communication solutions, prominently featuring the RJ-45 and RJ-9 connectors that are crucial in networking and telecommunications. These connectors are foundational to many applications, enabling efficient data transfer and ensuring reliable voice communications.

The RJ-45 connector is primarily used in Ethernet networks. It features eight pins and is designed for high-speed data transmission, making it the standard for wired local area networks (LANs). This connector supports various Ethernet standards including Fast Ethernet (100BASE-T), Gigabit Ethernet (1000BASE-T), and even 10 Gigabit Ethernet (10GBASE-T). An essential characteristic of the RJ-45 is its versatility, as it can be used with both straight-through and crossover cable configurations. This flexibility allows for straightforward connectivity between devices such as computers, routers, and switches.

Multi-Tech Systems employs advanced technology in their RJ-45 connectors, including support for Power over Ethernet (PoE). This innovation permits electrical power and data to be transmitted over the same cable, simplifying installations and reducing the need for additional wiring. The robust design of these connectors ensures durability and minimizes signal interference, thereby maximizing data integrity during transmission.

On the other hand, the RJ-9 connector, also known as the RJ-9 or RJ-10 connector, is typically used in telephone and headset applications. Characterized by its smaller size and four or six pins, the RJ-9 is optimized for voice frequency communication. It connects devices such as telephones, headsets, and other VoIP equipment, delivering clear audio quality that is essential for effective communication.

One standout feature of the RJ-9 connector is its ability to provide superior noise resistance, making it ideal for environments with significant electromagnetic interference. Multi-Tech Systems' RJ-9 connectors are designed for ease of use, allowing quick and simple connections. These connectors can often be found in various telephony devices, ensuring that they remain a staple in personal, commercial, and industrial communication systems.

In conclusion, Multi-Tech Systems continues to lead in the provision of reliable RJ-45 and RJ-9 connectors, integrating innovative technologies that enhance performance in data and voice communication. Whether in a high-speed networking environment or in everyday telephony applications, these connectors deliver the functionality and quality demanded by modern users. Their design and engineering reflect a commitment to excellence, helping users stay connected in an increasingly digital world.
Top Page Image Contents