Multi-Tech Systems RJ-45, RJ-9 manual Set the Time Delay. Use can use the 10 second default

Page 35

Chapter 3 – Using the Web Management Software

Example 4 – Set Up the Ethernet Router to Activate on Matching Caller IDs Only:

1.On the PPP > PPP Configuration screen, set up the following parameters:

PPP General

•Make sure that PPP is Enabled (the default).

•Make sure Dial-on-Demandis Enabled (the default).

•Set the Idle Time Out to the number of seconds you desire.

Authentication

•Your wireless service provider may require you to have a separate PPP username and password. If so, enter them here. Note: If a username and password are required, your wireless provider would have given them to you when you activated your account.

Modem Configuration

•Make sure your Dial Number is entered correctly: For CDMA, it is #777

For GPRS and EDGE, it is *99***1#

•Make sure your Init String 1 is setup correctly.

For GPRS and EDGE, Init string 1 should be the APN (i.e., AT+CGDCONT=1,"IP","internet")

Submit

•Click the Submit button to save the changes made on this screen.

2.On the PPP > Wakeup-on-Callscreen, set up the following parameters:

Wakeup-on-Call Configuration

•Select Enable for Wakeup-on-Call.

•Set the Time Delay. Use can use the 10 second default.

•Enter the Init Strings:

Set Wakeup Init String 1 by entering AT+CLIP=1

Set Wakeup Init String 2 by entering AT+CICB=0 (CDMA only)

•Submit Button

Click the Submit button to save these settings.

Caller ID Configuration

•Enter a caller’s ID that you want added to the Caller ID list.

•Add Button

Click the Add button to save each Caller ID as it is entered to the Caller ID list.

3.Save and Restart

Click Save and Restart once you have completed and submitted all the screens on which you have made changes. The device will save all the settings and reboot the PC.

Multi-Tech Systems, Inc. MultiModem Wireless Modem with Ethernet Interface (S000375B)

35

Page 34 Page 36
Image 35
Page 34 Page 36
Contents MultiModem→ Trademarks User GuideCopyright Record of Revisions Revision Date DescriptionTable of Contents Tools Packet FiltersGRE Tunnels Dhcp ServerProduct and Interface Descriptions Introduction Product DescriptionApplication Example Ship Kit Contents Vehicle Safety Safety WarningsHandling Precautions Safety Instructions for Hazardous LocationsFeatures Edge Modems Gprs Modems Cdma Modems SpecificationsAT Command Information Getting Started Wireless Account Setup IntroductionObtain a Wireless Account Phone Numbers for the Wireless ModemAntenna Connect Antenna, Ethernet, & PowerModem LEDs Front Panel LEDsEthernet LEDs Next Steps Set Your PC’s TCP/IP Address for Ethernet FunctionalityOpen a Web Browser LoginImportant Prerequisite for Activating a Cdma Account Cdma Activation Steps AT Command Modem Comment ResponseStep AT Command Response Comment Step AT Command ResponseLogout After Entering Activation Commands Signal Strength Rssi Prerequisite SetupOpen the Command Window Verify Signal StrengthChecking Network Registration and Roaming Status Benefits of Using the Wizard Setup Use the Wizard Setup for Quick ConfigurationShutdown Caution Set Time and DateImportant Note About Provider Fees Connecting to the InternetConnecting to the Internet Steps Page Navigating the Web Management Software Using the Web Management SoftwareDhcp Server Tools IP SetupServices Tunnels Logs NetworksWeb Management Software Screens IP SetupSyslog Configuration General ConfigurationIP Configuration Auto Dialout ConfigurationSubmit GeneralDaylight Configuration Time Zone ConfigurationImportant Note Daylight Saving Start TimeDaylight Saving End Time Add Static RoutesRemote Configuration IP Setup Remote ConfigurationIf NAT is disabled PPP PPP ConfigurationNAT Configuration If NAT is enabledIcmp Keep Alive Check Modem ConfigurationPPP General PPP Wakeup-on-Call Wakeup-on-Call ConfigurationCaller ID Configuration Caller Acknowledgement ConfigurationPPP Wakeup-On-Call Examples For Gprs and EDGE, it is *99***1# Set the Time Delay. Use can use the 10 second default Power-On Init String Configuration PPP Power-On ConfigurationNetwork Configuration Networks & ServicesNetworks & Services Network Configuration Service Configuration Networks & Services Service ConfigurationPacket Filter Packet FiltersPacket Filters Packet Filters Packet Filters Dnat Example Packet Filters Dnat ConfigurationDnat Configuration Example Nochange Example AnyExample MeterIP Connection Tracking Icmp ConfigurationPacket Filters Advanced GRE Tunnels GRE Tunnels GRE Tunnel ConfigurationGRE Tunnels GRE Routes Configuration GRE Tunnels GRE Routes ConfigurationDhcp Server Dhcp Server Subnet SettingsSubnet Settings Tools Tools Dhcp Fixed ConfigurationTools Dhcp Server Fixed AddressesImportant Notes Tools Service StatusTools Firmware Upgrade Firmware UpgradeLoad Configuration Tools Load ConfigurationTools Save Configuration Statistics & Logs Serial Statistics & LogsStatistics & Logs Ethernet Statistics & Logs PPP Statistics & Logs PPP Trace Statistics & Logs GRE Statistics Statistics & Logs SysInfoStatistics & Logs Dhcp Stat Appendix a a Reference Table of Commonly Supported Subnets Appendix a Reference Table of Commonly Supported Subnets Antenna Appendix B Wireless AntennaFused DC Power Cable Dimensions How to Change the Fuse Obtaining the Latest Firmware Version Appendix C Firmware Upgrade Using External Tftp ClientMulti-Tech Warranty Statement Multi-Tech Warranty StatementRepair Procedures for International Distributors Replacement PartsWaste Electrical and Electronic Equipment Weee Appendix E Waste Electrical Electronic EquipmentAntenna IndexWakeup on Call Examples

RJ-9, RJ-45 specifications

Multi-Tech Systems offers a range of communication solutions, prominently featuring the RJ-45 and RJ-9 connectors that are crucial in networking and telecommunications. These connectors are foundational to many applications, enabling efficient data transfer and ensuring reliable voice communications.

The RJ-45 connector is primarily used in Ethernet networks. It features eight pins and is designed for high-speed data transmission, making it the standard for wired local area networks (LANs). This connector supports various Ethernet standards including Fast Ethernet (100BASE-T), Gigabit Ethernet (1000BASE-T), and even 10 Gigabit Ethernet (10GBASE-T). An essential characteristic of the RJ-45 is its versatility, as it can be used with both straight-through and crossover cable configurations. This flexibility allows for straightforward connectivity between devices such as computers, routers, and switches.

Multi-Tech Systems employs advanced technology in their RJ-45 connectors, including support for Power over Ethernet (PoE). This innovation permits electrical power and data to be transmitted over the same cable, simplifying installations and reducing the need for additional wiring. The robust design of these connectors ensures durability and minimizes signal interference, thereby maximizing data integrity during transmission.

On the other hand, the RJ-9 connector, also known as the RJ-9 or RJ-10 connector, is typically used in telephone and headset applications. Characterized by its smaller size and four or six pins, the RJ-9 is optimized for voice frequency communication. It connects devices such as telephones, headsets, and other VoIP equipment, delivering clear audio quality that is essential for effective communication.

One standout feature of the RJ-9 connector is its ability to provide superior noise resistance, making it ideal for environments with significant electromagnetic interference. Multi-Tech Systems' RJ-9 connectors are designed for ease of use, allowing quick and simple connections. These connectors can often be found in various telephony devices, ensuring that they remain a staple in personal, commercial, and industrial communication systems.

In conclusion, Multi-Tech Systems continues to lead in the provision of reliable RJ-45 and RJ-9 connectors, integrating innovative technologies that enhance performance in data and voice communication. Whether in a high-speed networking environment or in everyday telephony applications, these connectors deliver the functionality and quality demanded by modern users. Their design and engineering reflect a commitment to excellence, helping users stay connected in an increasingly digital world.
Top Page Image Contents