Multi-Tech Systems MultiConnect Adapter Serial-to-Ethernet Adapter with IP manual

	Chapter 1 – Product Description & Specifications
Category	Description
Intelligent Features	High performance 10/100BaseT Ethernet bridge
	Half duplex or full duplex support on the WAN interface
	256 frame buffer
	Stores 10,000 MAC addresses
	Automatically learns MAC addresses
	Serial interface supports DTE speeds to 230K bps
	External and RS-232 power options
	High performance processor runs the protocols
	Command line interface
	Flash memory to update firmware with the latest enhancements
	Flexible IP protocol stack
	Compact, rugged industrial chassis design with desktop or panel mounting
	Two-year warranty
Software Features	Internet Applications
	DHCP Client:
	Request IP address for Ethernet Interfaces
	Telnet Server:
	Command Line Configuration
	Auto Dial-out Feature
	Command line via custom port (other than standard port 23)
	Telnet Client:
	Connect to remote Telnet Server
	Serial Auto Dial-in Feature
	UDP Server:
	Auto Dialout Feature with UDP Server support
	UDP Client:
	Serial Auto Dial-in Feature with UDP Client support
	Terminal Server:
	Network to Serial Connectivity
	Serial to Network Connectivity
	TFTP Server:
	Flash Upgrade
	SMTP Client:
	The email client embedded in the MultiConnect sends email to the configured
	recipients.
	Daylight savings mode feature.
	SNMP Agent:
	The SNMP Agent is used to configure the MultiConnect module or view the
	module's configuration or statistics using the SNMP manager compiled with
	proprietary MIB.
	RAW UDP/TCP Socket Support via Serial:
	Commands to simulate the BSD system calls of UDP and TCP which can be
	used to build a proprietary protocol on the serial device. Also to switch
	between the sockets in a single session.
	Supports to open, flush, send, receive, close, view statistics of TCP and UDP
	sockets via Serial.
	Supports both Client and Server modes for TCP and UDP.
	POP3 Client:
	The email client embedded in the MultiConnect receives email from the POP3
	Server. This feature is useful for field upgrades. Firmware upgrades can be
	sent as attachments.
	HTTP Server:
	To host Web pages on behalf of the serial device for monitoring and
	configuration of the serial device.
	Viewing configuration or statistics support.
	FTP Client:
	FTP Client embedded in the MultiConnect module lists the directory contents
	or sends/receives text/binary files to/from a remote server respectively. This
	feature is useful for field upgrades, etc. Firmware upgrades can be sent or
	received via FTP transfer. It also supports passive mode connection.

Multi-Tech Systems, Inc. MultiConnect Serial-to-Ethernet Adapter User Guide (S000344D) 7